We never sell your data to third parties
Grove Gear Flexaline GRG-BMQ826-30-L-140 (catalog GRG8260187.00) 30:1 single-reduction worm gear speed reducer with 2.63" center distance. Cast iron housing with motorized quill input for 140TC flange and left-hand solid output shaft (0.875" input diameter, 1.250" output diameter). IronMan-based Flexaline series offers interchangeable mounting with legacy Flexaline units.
MODEL GRG8260187.00
Contact supplier for technical support on: 800-626-2120
$1,169.96 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Assembly
BMQ-L
Center Distance
2.6 In.
Center distance (in)
2.63
Center Distance Range
1" thru 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
H-Tap Size
3/8-16 UNC
Height (in)
11.75
Housing material
Cast iron
HP Range
2HP (< 3)
Input Bore (C Face)
0.875
Input Diameter (in)
0.875
Input Flange
140TC
Input HP
2.145
Input HP @ 1750 RPM
2.145
Input RPM
1750
Input Style
Quill
Keyway
3/16 X 3/32
Length (in)
16.00
Max OHL (Output Shaft)
1625
Max Thrust Load (Output Shaft)
2091
Model Code
BMQ826
Motor Frame Size
140
Motor HP Rating
2
Mounting Style
No Base
No. of Gear Reductions
Single
Nominal Motor HP Rating to HP @ 1750 RPM
2
Output
Left
Output Diameter (in)
1.250
Output HP
1.743
Output Key
1/4 X 1.75
Output RPM
58
Output Shaft Assembly Code
L
Output Shaft Direction
Left
Output Shaft Orientation
L
Output Style
L
Output Torque
1883
Output Torque Range
1000 to 2500 in lbs
Output type
Solid Shaft
Overhung Load
1625
Paint/Coating
Blue
Product Line
GRG Series - Ironman Worm Gear Reducers
Product Type
Right Angle
Ratio
30 to 1
Ratio Range
30-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
GRG Series - Ironman Worm Gear Reducers
Series Code
GRG
Series Style
GRG-BMQ-L
Series Type
Cast Iron 800 Worm Gear Reducers
Service Factor
1
Shaft Seal Material
Viton
Size
140TC
TAP Depth
0.69
Thrust Rating - output shaft
2091
Width (in)
12.25
Regal Beloit Grove Gear&Reg; GRG8260187.00
UPC: 690310042328 | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear® IRONMAN® Worm Gear Reducer, Right Angle Single Reduction, Series: GRG, 30:1 Gear Ratio, 2.145 hp Input, 1.743 hp Output, 2 hp Motor, C-Face Quill Input, Shaft Output, 7/8 in Dia Input, 1.25 in Dia x 2.73 in L Output, 58 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 1883 in-lb Output, 2.63 in Centre Distance, 3/16 x 3/32 in Input, 1/4 x 1-3/4 in Output Keyway, PAG Synthetic Oil Lubrication, No Base Mount, Cast Iron
Features:
- One piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment
- Factory filled with premium Mobil® Glygoyle® 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks
- Oversized steel output shaft provides superior overhung load and torque characteristics
Specs:
- Input Maximum Speed: 1750 rpm
- Output Maximum Speed: 58 rpm
- Centre Distance: 2.63 in
- Input Type: C-Face Quill
- Output Size: 1.25 in Dia x 2.73 in L
- Input Size: 7/8 in Dia
- Lubrication Type: PAG Synthetic Oil
- Torque Rating: 1883 in-lb Output
- Horsepower: 2.145 hp Input, 1.743 hp Output, 2 hp Motor
- Keyway Size: 3/16 x 3/32 in Input, 1/4 x 1-3/4 in Output
- Gear Ratio: 30:1
- Output Type: Shaft
- Mounting Type: No Base
- Material: Cast Iron
- Type: Right Angle Single Reduction
- Series: GRG
Packaging:
- Length: 16.0 in
- Width: 12.25 in
- Height: 11.75 in
- Weight: 56.0 lb
Warranty:
Limited
| Brand | GMN Bearings USA |
| Model | S 55 X 85 X 10 |
| Brand | Electra/Grove Gear |
| Model | GR8150196.00 |