We never sell your data to third parties
Grove Gear Flexaline GRG-BM832-10-L-180 (catalog GRG8320073.00) 10:1 ratio cast iron single-reduction worm gear speed reducer with 3.25" center distance, 180TC flexible coupling input, left-hand solid output, 0.875" input diameter, 1.5" output diameter. IronMan-based Flexaline series with interchangeable mounting for legacy Flexaline units. Blue painted finish, Viton shaft seals, base mount, 2700 lb-in output torque at 1750 RPM input.
MODEL GRG8320073.00
Contact supplier for technical support on: 800-626-2120
$2,047.10 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Assembly
BM-L
Center Distance
3.2 In.
Center distance (in)
3.25
Center Distance Range
1" thru 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
H-Tap Size
7/16 - 14 UNC
Housing material
Cast iron
HP Range
7-1/2 (< 10)
Input Bore (C Face)
1.125
Input Diameter (in)
0.875
Input Flange
180TC
Input HP
8.092
Input HP @ 1750 RPM
8.092
Input Keyway (C Face)
1/4 x 1/8
Input RPM
1750
Input Style
3-Piece Coupled
Keyway
3/16 X 1.63
Max OHL (Output Shaft)
2275
Max Thrust Load (Output Shaft)
2026
Model Code
BM832
Motor Frame Size
180TC
Mounting Style
Base
No. of Gear Reductions
Single
Output
Left
Output Diameter (in)
1.500
Output HP
7.497
Output Key
3/8 X 2.63
Output RPM
175
Output Shaft Assembly Code
L
Output Shaft Direction
Left
Output Shaft Orientation
L
Output Style
L
Output Torque
2700
Output Torque Range
2500 to 5000 in lbs
Output type
Solid Shaft
Overhung Load
2170
Paint/Coating
Blue
Product Line
GRG Series - Ironman Worm Gear Reducers
Product Type
Worm Speed Reducer
Ratio
10 to 1
Ratio Range
10-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
GRG Series - Ironman Worm Gear Reducers
Series Code
GRG
Series Style
GRG-BM-L
Service Factor
1
Shaft Seal Material
Viton
Size
180TC
TAP Depth
0.88
Thrust Rating - output shaft
2026
Regal Beloit Grove Gear&Reg; GRG8320073.00
UPC: 690310044216 | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear IRONMAN Worm Gear Reducer, Right Angle Single Reduction, Series: GRG, 10:1 Gear Ratio, 8.092 hp Input, 7.497 hp Output, C-Face Coupled Input, Shaft Output, 1-1/8 in Dia Input, 1.5 in Dia x 3.66 in L Output, 175 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 2700 in-lb Output, 3-1/4 in Centre Distance, 1/4 x 1/8 in Input, 0.375 x 2.63 in Output Keyway, PAG Synthetic Oil Lubrication, Base Mount, Cast Iron
Features:
- One piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment
- Factory filled with premium Mobil Glygoyle 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks
- Oversized steel output shaft provides superior overhung load and torque characteristics
Specs:
| Input Maximum Speed | 1750 rpm |
|---|---|
| Output Maximum Speed | 175 rpm |
| Centre Distance | 3-1/4 in |
| Input Type | C-Face Coupled |
| Output Size | 1.5 in Dia x 3.66 in L |
| Input Size | 1-1/8 in Dia |
| Lubrication Type | PAG Synthetic Oil |
| Torque Rating | 2700 in-lb Output |
| Horsepower | 8.092 hp Input, 7.497 hp Output |
| Keyway Size | 1/4 x 1/8 in Input, 0.375 x 2.63 in Output |
| Gear Ratio | 10:1 |
| Output Type | Shaft |
| Mounting Type | Base |
| Material | Cast Iron |
| Type | Right Angle Single Reduction |
| Series | GRG |
Packaging:
Limited
SKU: 1328004
Gear box
excellent service, fast, easy, and customer service outstanding, if any changes they call and let you know,
Read moreSKU: 1318956
Replacement for an obsolete gearbox
We needed this gearbox as a replacement for an obsolete model made by Grove Gear back in the 90's. Needed to call the company to find out the equivalent and they directed me towards MRO. If this one will last as long as its predecessor I'll be retired by the time it will need to be replaced again.
Read more
#1323725
Brand
Electra/Grove Gear
Model
EL8420073.00
#1322473
Brand
Electra/Grove Gear
Model
EL8320073.00
#1342791
Brand
Electra/Grove Gear
Model
GRL8320073.00
#195694
Brand
HubCity
Model
20-2007304
#1765296
Brand
HubCity
Model
20-2007309
| Brand | Rexnord |
| Model | 7300216M1CB525S |
| Brand | Contrinex Sensors |
| Model | DW-AD-611-C12P-1523 |
SKU: 1328004
Gear box
excellent service, fast, easy, and customer service outstanding, if any changes they call and let you know,
Read moreSKU: 1318956
Replacement for an obsolete gearbox
We needed this gearbox as a replacement for an obsolete model made by Grove Gear back in the 90's. Needed to call the company to find out the equivalent and they directed me towards MRO. If this one will last as long as its predecessor I'll be retired by the time it will need to be replaced again.
Read more