We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Grove Gear Flexaline GRG-BMQ832-100-R-56 (catalog GRG8320260.00) is a 100:1 single reduction right angle worm gear speed reducer with 3.25" center distance. The cast iron housing encloses a motorized quill input accepting a 56C motor flange with 0.625" input diameter and delivers 1.5" right hand solid output. This IronMan-based Flexaline series reducer offers interchangeable mounting with legacy Flexaline units.
MODEL GRG8320260.00
Contact supplier for technical support on: 800-626-2120
$1,865.95 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Assembly
BMQ-R
Center Distance
3.2 In.
Center distance (in)
3.25
Center Distance Range
1" thru 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
H-Tap Size
7/16-14 UNC
Height (in)
15.00
Housing material
Cast iron
HP Range
1/2 to 3/4 HP (< 1)
Input Bore (C Face)
0.625
Input Diameter (in)
0.625
Input Flange
56C
Input HP
0.691
Input HP @ 1750 RPM
0.691
Input Keyway (C Face)
3/16 x 3/32
Input RPM
1750
Input Style
Quill
Length (in)
19.38
Max OHL (Output Shaft)
2275
Max Thrust Load (Output Shaft)
2574
Model Code
BMQ832
Motor Frame Size
56
Mounting Style
Base
No. of Gear Reductions
Single
Output
Right
Output Diameter (in)
1.500
Output HP
0.435
Output Key
3/8 x 2.63
Output RPM
17
Output Shaft Assembly Code
R
Output Shaft Direction
Right
Output Shaft Orientation
R
Output Style
R
Output Torque
1567
Output Torque Range
1000 to 2500 in lbs
Output type
Solid Shaft
Overhung Load
2275
Paint/Coating
Blue
Product Line
GRG Series - Ironman Worm Gear Reducers
Product Type
Right Angle
Ratio
100 to 1
Ratio Range
100-1 to 250-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
GRG Series - Ironman Worm Gear Reducers
Series Code
GRG
Series Style
GRG-BMQ-R
Service Factor
1
Shaft Seal Material
Viton
Size
56C
TAP Depth
0.88
Thrust Rating - output shaft
2574
Width (in)
15.11
Regal Beloit Grove Gear&Reg; GRG8320260.00
UPC: 690310045626 | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear IRONMAN Worm Gear Reducer, Right Angle Single Reduction, Series: GRG, 100:1 Gear Ratio, 0.691 hp Input, 0.435 hp Output, C-Face Quill Input, Shaft Output, 5/8 in Dia Input, 1.5 in Dia x 3.66 in L Output, 17 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 1567 in-lb Output, 3-1/4 in Centre Distance, 3/16 x 3/32 in Input, 0.375 x 2.63 in Output Keyway, PAG Synthetic Oil Lubrication, Base Mount, Cast Iron
Features:
- One piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment
- Factory filled with premium Mobil Glygoyle 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks
- Oversized steel output shaft provides superior overhung load and torque characteristics
Specs:
| Input Maximum Speed | 1750 rpm |
|---|---|
| Output Maximum Speed | 17 rpm |
| Centre Distance | 3-1/4 in |
| Input Type | C-Face Quill |
| Output Size | 1.5 in Dia x 3.66 in L |
| Input Size | 5/8 in Dia |
| Lubrication Type | PAG Synthetic Oil |
| Torque Rating | 1567 in-lb Output |
| Horsepower | 0.691 hp Input, 0.435 hp Output |
| Keyway Size | 3/16 x 3/32 in Input, 0.375 x 2.63 in Output |
| Gear Ratio | 100:1 |
| Output Type | Shaft |
| Mounting Type | Base |
| Material | Cast Iron |
| Type | Right Angle Single Reduction |
| Series | GRG |
Packaging:
Limited
| Brand | GMN Bearings USA |
| Model | SM61906 CTA P4+ DUL |
| Brand | Consolidated Bearings |
| Model | H-2311 X 50 MM |
| Brand | MagPowr |
| Model | HEB2503KVF036 |