We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Grove Gear GRL-B821-10-D GRL8210027.00 Leeson IronMan Interchange 10:1 ratio single-reduction worm gear speed reducer with 2.06" center distance. Cast iron housing with non-flanged double extension solid output shaft. 0.625" input diameter, 1" output diameter. Right angle mount.
MODEL GRL8210027.00
Contact supplier for technical support on: 800-626-2120
$916.19 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Assembly
B-D
Center Distance
2.1 In.
Center distance (in)
2.06
Center Distance Range
1" thru 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
H-Tap Size
5/16-18 UNC
Height (in)
10.50
Housing material
Cast iron
HP Range
2HP (< 3)
Input Diameter (in)
0.625
Input HP
2.464
Input HP @ 1750 RPM
2.464
Input RPM
1750
Input Style
Solid Input Shaft
Keyway
3/16 X 1.38
Length (in)
10.69
Max OHL (Output Shaft)
1065
Max Thrust Load (Output Shaft)
898
Model Code
B821
Mounting Style
Base
No. of Gear Reductions
Single
Output
Left & Right
Output Diameter (in)
1.000
Output HP
2.235
Output Key
1/4 X 1.44
Output RPM
175
Output Shaft
Solid Shaft
Output Shaft Assembly Code
D
Output Shaft Direction
Double
Output Shaft Orientation
LR
Output Style
D
Output Torque
805
Output Torque Range
500 to 1000 in lbs
Output type
Solid Shaft
Overhung Load
1065
Paint/Coating
Blue
Product Line
GRL Series - Ironman Worm Gear Reducers
Product Type
Worm Speed Reducer
Ratio
10 to 1
Ratio Range
10-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
GRL Series - Ironman Worm Gear Reducers
Series Code
GRL
Series Style
GRL-B-D
Series Type
Cast Iron 800 Worm Gear Reducers
Service Factor
1
Shaft Seal Material
Viton
TAP Depth
0.63
Thrust Rating - output shaft
898
Width (in)
9.06
Regal Beloit Grove Gear&Reg; GRL8210027.00
UPC: 690310047019 | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear® IRONMAN® Worm Gear Reducer, Right Angle Single Reduction, Series: GRL, 10:1 Gear Ratio, 2.464 hp Input, 2.235 hp Output, Shaft Input, Shaft Output, 0.625 in Dia x 1.76 in L Input, 1 in Dia x 2.29 in L Output, 175 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 805 in-lb Output, 2.06 in Centre Distance, 0.1875 x 1.38 in Input, 0.25 x 1.44 in Output Keyway, PAG Synthetic Oil Lubrication, Base Mount, Cast Iron, 6.38 in H
Features:
- One piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment
- Factory filled with premium Mobil® Glygoyle® 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers
Specs:
- Input Maximum Speed: 1750 rpm
- Output Maximum Speed: 175 rpm
- Centre Distance: 2.06 in
- Input Type: Shaft
- Output Size: 1 in Dia x 2.29 in L
- Input Size: 0.625 in Dia x 1.76 in L
- Lubrication Type: PAG Synthetic Oil
- Torque Rating: 805 in-lb Output
- Horsepower: 2.464 hp Input, 2.235 hp Output
- Keyway Size: 0.1875 x 1.38 in Input, 0.25 x 1.44 in Output
- Gear Ratio: 10:1
- Output Type: Shaft
- Mounting Type: Base
- Dimensions: 6.38 in H
- Material: Cast Iron
- Type: Right Angle Single Reduction
- Series: GRL
Packaging:
- Length: 10.69 in
- Width: 9.06 in
- Height: 10.5 in
- Weight: 25.0 lb
Warranty:
Limited
SKU: 1318956
Replacement for an obsolete gearbox
We needed this gearbox as a replacement for an obsolete model made by Grove Gear back in the 90's. Needed to call the company to find out the equivalent and they directed me towards MRO. If this one will last as long as its predecessor I'll be retired by the time it will need to be replaced again.
Read moreSKU: 1328004
Gear box
excellent service, fast, easy, and customer service outstanding, if any changes they call and let you know,
Read more
| Brand | Coilhose |
| Model | N38-50CC15 |
| Brand | Coilhose |
| Model | 29-2T18-00 |
| Brand | RAB Lighting |
| Model | G16.5-3-E12-950-F-F |
| Brand | Jason Industrial |
| Model | 12/3V530 |
| Brand | Coilhose |
| Model | PR14-5-Y |
| Brand | Coilhose |
| Model | NC2525-100G |
| Brand | Coilhose |
| Model | NC1210-100N |
SKU: 1318956
Replacement for an obsolete gearbox
We needed this gearbox as a replacement for an obsolete model made by Grove Gear back in the 90's. Needed to call the company to find out the equivalent and they directed me towards MRO. If this one will last as long as its predecessor I'll be retired by the time it will need to be replaced again.
Read moreSKU: 1328004
Gear box
excellent service, fast, easy, and customer service outstanding, if any changes they call and let you know,
Read more