We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Grove Gear Narrow Housing IronMan NH-HMQ818-50-H1-48-16 (catalog NH8180581.16) is a 50:1 ratio single-reduction worm gear speed reducer with 1.75" center distance. This cast iron unit features a 48C C-face quill input with 0.5" input diameter and a 1" hollow output bore. The universal hand hollow output accommodates multiple mounting positions. Part of the Narrow Housing IronMan series.
MODEL NH8180581.16
Contact supplier for technical support on: 800-626-2120
$1,213.73 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Assembly
HMQ-H1
Bore Code
16
Center Distance
1.8 In.
Center distance (in)
1.75
Center Distance Range
1" thru 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
Housing material
Cast iron
HP Range
1/2 to 3/4 HP (< 1)
Input Bore (C Face)
0.5
Input Diameter (in)
0.5
Input Flange
48C
Input HP
0.515
Input HP @ 1750 RPM
0.515
Input Keyway (C Face)
1/8 X 1/16
Input RPM
1750
Input Style
Quill
Max OHL (Output Shaft)
1250
Max Thrust Load (Output Shaft)
1144
Model Code
HMQ818
Motor Frame Size
48
Mounting Style
Shaft Mount
No. of Gear Reductions
Single
Output
Hollow
Output Diameter (in)
1
Output Hollow Shaft Diameter (in)
1.000
Output HP
0.352
Output Key
1/4 X 2.50
Output RPM
35
Output Shaft Assembly Code
H1
Output Shaft Direction
H1
Output Shaft Orientation
H1
Output Style
H1
Output Torque
634
Output Torque Range
500 to 1000 in lbs
Output type
Hollow bore
Overhung Load Rating (Output Shaft(lb))
1250
Paint/Coating
Blue
Product Line
NH Series - Ironman Narrow Housing Worm Gear Reducers
Product Type
Right Angle
Ratio
50 to 1
Ratio Range
50-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
NH Series - Ironman Narrow Housing Worm Gear Reducers
Series Code
NH
Series Style
NH-HMQ-H1
Service Factor
1
Shaft Seal Material
Viton
Size
48CZ
Thrust Rating - output shaft
1144
Regal Beloit Grove Gear&Reg; NH8180581.16
UPC: 690310061107 | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear® IRONMAN® Worm Gear Reducer, Narrow Housing Right Angle Single Reduction, Series: NH Series, 50:1 Gear Ratio, 0.515 hp Input, 0.352 hp Output, C-Face Quill Input, Hollow Bore Output, 1/2 in Dia Input, 1 in Dia Output, 35 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 634 in-lb Output, 1-3/4 in Centre Distance, 1/8 x 1/16 in Input, 1/4 x 3 in Output Keyway, PAG Synthetic Oil Lubrication, Shaft Mount, Cast Iron
Features:
- Rugged cast iron housing, covers and flanges provide superior strength and rigidity
- Factory filled with premium Mobil® Glygoyle® 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Designed with industry leading premium features as standard
- Compact housing design to fit where other reducer brands cannot
Specs:
- Input Maximum Speed: 1750 rpm
- Output Maximum Speed: 35 rpm
- Centre Distance: 1-3/4 in
- Input Type: C-Face Quill
- Output Size: 1 in Dia
- Input Size: 1/2 in Dia
- Lubrication Type: PAG Synthetic Oil
- Torque Rating: 634 in-lb Output
- Horsepower: 0.515 hp Input, 0.352 hp Output
- Keyway Size: 1/8 x 1/16 in Input, 1/4 x 3 in Output
- Gear Ratio: 50:1
- Output Type: Hollow Bore
- Mounting Type: Shaft
- Material: Cast Iron
- Type: Narrow Housing Right Angle Single Reduction
- Series: NH Series
Packaging:
- Weight: 21.0 lb
Warranty:
Limited
SKU: 1318238
Right on
Took a bit to ship but after it shipped I got it fast. Right product.
Read moreSKU: 1328004
Enginiering
got what I need it the first time. no hassle, friendly customer service, communication is excellent, I am happy with the delivery time.
Read moreSKU: 1318956
Replacement for an obsolete gearbox
We needed this gearbox as a replacement for an obsolete model made by Grove Gear back in the 90's. Needed to call the company to find out the equivalent and they directed me towards MRO. If this one will last as long as its predecessor I'll be retired by the time it will need to be replaced again.
Read more
| Brand | SEW Eurodrive |
| Model | 01.3109128802.0003.00 |
| Brand | Dixon Sanitary Fittings |
| Model | B5107A200CC-C |
| Brand | SEW Eurodrive |
| Model | 10000818 |
| Brand | Dixon Sanitary Fittings |
| Model | B5120E1200W |
| Brand | Dixon Sanitary Fittings |
| Model | 14-19-G150 |
| Brand | Dixon Sanitary Fittings |
| Model | B5120E800WU-CBC |
SKU: 1318238
Right on
Took a bit to ship but after it shipped I got it fast. Right product.
Read moreSKU: 1328004
Enginiering
got what I need it the first time. no hassle, friendly customer service, communication is excellent, I am happy with the delivery time.
Read moreSKU: 1318956
Replacement for an obsolete gearbox
We needed this gearbox as a replacement for an obsolete model made by Grove Gear back in the 90's. Needed to call the company to find out the equivalent and they directed me towards MRO. If this one will last as long as its predecessor I'll be retired by the time it will need to be replaced again.
Read more