We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Grove Gear Narrow Housing IronMan NH-BM824-20-D-56 (catalog NH8240065.00) is a 20:1 ratio single-reduction worm gear speed reducer with 2.38" center distance. It features a cast iron housing, 56C motorized flexible coupling input, and double-extension solid output shaft with 0.75" input diameter and 1" output diameter. Designed for right-angle power transmission in compact spaces.
MODEL NH8240065.00
Contact supplier for technical support on: 800-626-2120
$1,227.49 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Assembly
BM-D
Center Distance
2.4 In.
Center distance (in)
2.38
Center Distance Range
1" thru 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
H-Tap Size
3/8 - 16 UNC
Housing material
Cast iron
HP Range
2HP (< 3)
Input Bore (C Face)
0.625
Input Diameter (in)
0.75
Input Flange
56C
Input HP
2.326
Input HP @ 1750 RPM
2.326
Input Keyway (C Face)
3/16 x 3/32
Input RPM
1750
Input Style
3-Piece Coupled
Keyway
3/16 X 1.63
Max OHL (Output Shaft)
1300
Max Thrust Load (Output Shaft)
2091
Model Code
BM824
Motor Frame Size
56
Mounting Style
Base
No. of Gear Reductions
Single
Output
Left & Right
Output Diameter (in)
1.000
Output HP
1.972
Output Key
1/4 x 1.75
Output RPM
87.5
Output Shaft Assembly Code
D
Output Shaft Direction
Double
Output Shaft Orientation
LR
Output Style
D
Output Torque
1421
Output Torque Range
1000 to 2500 in lbs
Output type
Solid Shaft
Overhung Load
1770
Paint/Coating
Blue
Product Line
NH Series - Ironman Narrow Housing Worm Gear Reducers
Product Type
Right Angle
Ratio
20 to 1
Ratio Range
20-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
NH Series - Ironman Narrow Housing Worm Gear Reducers
Series Code
NH
Series Style
NH-BM-D
Service Factor
1
Shaft Seal Material
Viton
Size
56C
TAP Depth
0.69
Thrust Rating - output shaft
2091
Regal Beloit Grove Gear&Reg; NH8240065.00
UPC: | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear® IRONMAN® Worm Gear Reducer, Narrow Housing Right Angle Single Reduction, Series: NH Series, 20:1 Gear Ratio, 2.326 hp Input, 1.972 hp Output, C-Face Coupled Input, Shaft Output, 5/8 in Dia Input, 1 in Dia x 2.91 in L Output, 87 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 1421 in-lb Output, 2.38 in Centre Distance, 3/16 x 3/32 in Input, 1/4 x 1-3/4 in Output Keyway, PAG Synthetic Oil Lubrication, Base Mount, Cast Iron
Features:
- Rugged cast iron housing, covers and flanges provide superior strength and rigidity
- Factory filled with premium Mobil® Glygoyle® 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Designed with industry leading premium features as standard
- Compact housing design to fit where other reducer brands cannot
Specs:
- Input Maximum Speed: 1750 rpm
- Output Maximum Speed: 87 rpm
- Centre Distance: 2.38 in
- Input Type: C-Face Coupled
- Output Size: 1 in Dia x 2.91 in L
- Input Size: 5/8 in Dia
- Lubrication Type: PAG Synthetic Oil
- Torque Rating: 1421 in-lb Output
- Horsepower: 2.326 hp Input, 1.972 hp Output
- Keyway Size: 3/16 x 3/32 in Input, 1/4 x 1-3/4 in Output
- Gear Ratio: 20:1
- Output Type: Shaft
- Mounting Type: Base
- Material: Cast Iron
- Type: Narrow Housing Right Angle Single Reduction
- Series: NH Series
Packaging:
- Weight: 40.0 lb
Warranty:
Limited
SKU: 1328004
Enginiering
got what I need it the first time. no hassle, friendly customer service, communication is excellent, I am happy with the delivery time.
Read moreSKU: 2919143
Grove gear
ordered it got a week early was exact to the specs performed flawlessly
Read moreSKU: 1318956
Replacement for an obsolete gearbox
We needed this gearbox as a replacement for an obsolete model made by Grove Gear back in the 90's. Needed to call the company to find out the equivalent and they directed me towards MRO. If this one will last as long as its predecessor I'll be retired by the time it will need to be replaced again.
Read more
| Brand | Electra/Grove Gear |
| Model | GR8240211.00 |
| Brand | Electra/Grove Gear |
| Model | GR8240213.00 |
| Brand | Electra/Grove Gear |
| Model | GR8130039.00 |
SKU: 1328004
Enginiering
got what I need it the first time. no hassle, friendly customer service, communication is excellent, I am happy with the delivery time.
Read moreSKU: 2919143
Grove gear
ordered it got a week early was exact to the specs performed flawlessly
Read moreSKU: 1318956
Replacement for an obsolete gearbox
We needed this gearbox as a replacement for an obsolete model made by Grove Gear back in the 90's. Needed to call the company to find out the equivalent and they directed me towards MRO. If this one will last as long as its predecessor I'll be retired by the time it will need to be replaced again.
Read more