We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Grove Gear Narrow Housing IronMan NH-BM830-30-D-56 (catalog NH8300067.00) is a 30:1 single-reduction worm gear speed reducer with 3.00" center distance. It features a cast iron housing, 56C motorized flexible coupling input with 0.875" input diameter, and double-extension solid output with 1.250" output diameter. This right-angle reducer is part of the Narrow Housing series for compact installations.
MODEL NH8300067.00
Contact supplier for technical support on: 800-626-2120
$1,776.78 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Assembly
BM-D
Center Distance
3 In.
Center distance (in)
3.00
Center Distance Range
1" thru 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
H-Tap Size
3/8 - 16 UNC
Housing material
Cast iron
HP Range
2HP (< 3)
Input Bore (C Face)
0.625
Input Diameter (in)
0.875
Input Flange
56C
Input HP
2.879
Input HP @ 1750 RPM
2.382
Input Keyway (C Face)
3/16 x 3/32
Input RPM
1750
Input Style
3-Piece Coupled
Keyway
3/16 X 1.63
Max OHL (Output Shaft)
1950
Max Thrust Load (Output Shaft)
2574
Model Code
BM830
Motor Frame Size
56
Mounting Style
Base
No. of Gear Reductions
Single
Output
Left & Right
Output Diameter (in)
1.250
Output HP
2.332
Output Key
1/4 x 1.75
Output RPM
58
Output Shaft Assembly Code
D
Output Shaft Direction
Double
Output Shaft Orientation
LR
Output Style
D
Output Torque
2105
Output Torque Range
2500 to 5000 in lbs
Output type
Solid Shaft
Overhung Load
2170
Paint/Coating
Blue
Product Line
NH Series - Ironman Narrow Housing Worm Gear Reducers
Product Type
Right Angle
Ratio
30 to 1
Ratio Range
30-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
NH Series - Ironman Narrow Housing Worm Gear Reducers
Series Code
NH
Series Style
NH-BM-D
Service Factor
1
Shaft Seal Material
Viton
Size
56C
TAP Depth
0.75
Thrust Rating - output shaft
2574
Regal Beloit Grove Gear&Reg; NH8300067.00
UPC: 690310072233 | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear® IRONMAN® Worm Gear Reducer, Narrow Housing Right Angle Single Reduction, Series: NH Series, 30:1 Gear Ratio, 2.879 hp Input, 2.332 hp Output, C-Face Coupled Input, Shaft Output, 5/8 in Dia Input, 1.25 in Dia x 3.56 in L Output, 58 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 2519 in-lb Output, 3 in Centre Distance, 3/16 x 3/32 in Input, 1/4 x 1-3/4 in Output Keyway, PAG Synthetic Oil Lubrication, Base Mount, Cast Iron
Features:
- Rugged cast iron housing, covers and flanges provide superior strength and rigidity
- Factory filled with premium Mobil® Glygoyle® 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Designed with industry leading premium features as standard
- Compact housing design to fit where other reducer brands cannot
Specs:
- Input Maximum Speed: 1750 rpm
- Output Maximum Speed: 58 rpm
- Centre Distance: 3 in
- Input Type: C-Face Coupled
- Output Size: 1.25 in Dia x 3.56 in L
- Input Size: 5/8 in Dia
- Lubrication Type: PAG Synthetic Oil
- Torque Rating: 2519 in-lb Output
- Horsepower: 2.879 hp Input, 2.332 hp Output
- Keyway Size: 3/16 x 3/32 in Input, 1/4 x 1-3/4 in Output
- Gear Ratio: 30:1
- Output Type: Shaft
- Mounting Type: Base
- Material: Cast Iron
- Type: Narrow Housing Right Angle Single Reduction
- Series: NH Series
Packaging:
- Weight: 59.0 lb
Warranty:
Limited
