We never sell your data to third parties
Grove Gear Narrow Housing NH-B842-100-D NH8420036.00 100:1 ratio single reduction worm gear speed reducer with 4.25" center distance. Cast iron housing with double extension solid output shaft, 1.25" input diameter, 1.75" output diameter. Right angle base mount, blue painted finish, Viton shaft seals. 1.201 input HP at 1750 RPM, 2852 lb-in output torque, 1.0 service factor.
MODEL NH8420036.00
Contact supplier for technical support on: 800-626-2120
$3,051.81 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Assembly
B-D
Center Distance
4.2 In.
Center distance (in)
4.25
Center Distance Range
Above 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
H-Tap Size
1/2 - 13 UNC
Housing material
Cast iron
HP Range
1 to 1-1/2 (< 2)
Input Diameter (in)
1.25
Input HP
1.201
Input HP @ 1750 RPM
1.201
Input RPM
1750
Input Style
Solid Input Shaft
Keyway
1/4 X 2.50
Max OHL (Output Shaft)
3750
Max Thrust Load (Output Shaft)
2533
Model Code
B842
Mounting Style
Base
No. of Gear Reductions
Single
Output
Left & Right
Output Diameter (in)
1.750
Output HP
0.792
Output Key
3/8 x 2.25
Output RPM
17
Output Shaft
Solid Shaft
Output Shaft Assembly Code
D
Output Shaft Direction
Double
Output Shaft Orientation
LR
Output Style
D
Output Torque
2852
Output Torque Range
2500 to 5000 in lbs
Output type
Solid Shaft
Overhung Load Rating (Output Shaft(lb))
3750
Paint/Coating
Blue
Product Line
NH Series - Ironman Narrow Housing Worm Gear Reducers
Product Type
Right Angle
Ratio
100 to 1
Ratio Range
100-1 to 250-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
NH Series - Ironman Narrow Housing Worm Gear Reducers
Series Code
NH
Series Style
NH-B-D
Service Factor
1
Shaft Seal Material
Viton
TAP Depth
1
Thrust Rating - output shaft
2533
Regal Beloit Grove Gear&Reg; NH8420036.00
UPC: 690310079225 | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear® IRONMAN® Worm Gear Reducer, Narrow Housing Right Angle Single Reduction, Series: NH Series, 100:1 Gear Ratio, 1.201 hp Input, 0.792 hp Output, Shaft Input, Shaft Output, 1.25 in Dia x 3.47 in L Input, 1.75 in Dia x 3.88 in L Output, 17 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 2852 in-lb Output, 4-1/4 in Centre Distance, 1/4 x 2-1/2 in Input, 3/8 x 2-1/4 in Output Keyway, PAG Synthetic Oil Lubrication, Base Mount, Cast Iron, 11-1/2 in H
Features:
- Rugged cast iron housing, covers and flanges provide superior strength and rigidity
- Factory filled with premium Mobil® Glygoyle® 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Designed with industry leading premium features as standard
- Compact housing design to fit where other reducer brands cannot
Specs:
- Input Maximum Speed: 1750 rpm
- Output Maximum Speed: 17 rpm
- Centre Distance: 4-1/4 in
- Input Type: Shaft
- Output Size: 1.75 in Dia x 3.88 in L
- Input Size: 1.25 in Dia x 3.47 in L
- Lubrication Type: PAG Synthetic Oil
- Torque Rating: 2852 in-lb Output
- Horsepower: 1.201 hp Input, 0.792 hp Output
- Keyway Size: 1/4 x 2-1/2 in Input, 3/8 x 2-1/4 in Output
- Gear Ratio: 100:1
- Output Type: Shaft
- Mounting Type: Base
- Dimensions: 11-1/2 in H
- Material: Cast Iron
- Type: Narrow Housing Right Angle Single Reduction
- Series: NH Series
Packaging:
- Weight: 116.0 lb
Warranty:
Limited
SKU: 1328004
Gear box
excellent service, fast, easy, and customer service outstanding, if any changes they call and let you know,
Read moreSKU: 1328004
Enginiering
got what I need it the first time. no hassle, friendly customer service, communication is excellent, I am happy with the delivery time.
Read moreSKU: 1318956
Replacement for an obsolete gearbox
We needed this gearbox as a replacement for an obsolete model made by Grove Gear back in the 90's. Needed to call the company to find out the equivalent and they directed me towards MRO. If this one will last as long as its predecessor I'll be retired by the time it will need to be replaced again.
Read more
| Brand | NK North America Inc. |
| Model | K0435.201212 |
| Brand | NSK Bearings |
| Model | SAFD22536-607 |
SKU: 1328004
Gear box
excellent service, fast, easy, and customer service outstanding, if any changes they call and let you know,
Read moreSKU: 1328004
Enginiering
got what I need it the first time. no hassle, friendly customer service, communication is excellent, I am happy with the delivery time.
Read moreSKU: 1318956
Replacement for an obsolete gearbox
We needed this gearbox as a replacement for an obsolete model made by Grove Gear back in the 90's. Needed to call the company to find out the equivalent and they directed me towards MRO. If this one will last as long as its predecessor I'll be retired by the time it will need to be replaced again.
Read more