We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Grove Gear Narrow Housing IronMan NH-BMQ852-60-L-210 60:1 single-reduction worm gear speed reducer with 5.25" center distance. Features a 210TC C-face quill input, 1.375" input diameter, and 2.000" solid output shaft left hand. Cast iron housing with blue paint, Viton seals, and base mount. Designed for right-angle power transmission in industrial applications.
MODEL NH8520334.00
Contact supplier for technical support on: 800-626-2120
$5,128.87 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Assembly
BMQ-L
Center Distance
5.2 In.
Center distance (in)
5.25
Center Distance Range
Above 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
H-Tap Size
5/8 - 11 UNC
Housing material
Cast iron
HP Range
5HP (< 7-1/2)
Input Bore (C Face)
1.375
Input Diameter (in)
1.375
Input Flange
210TC
Input HP
5.816
Input HP @ 1750 RPM
5.816
Input Keyway (C Face)
5/16 x 5/32
Input RPM
1750
Input Style
Quill
Max OHL (Output Shaft)
3570
Max Thrust Load (Output Shaft)
3412
Model Code
BMQ852
Motor Frame Size
210
Mounting Style
Base
No. of Gear Reductions
Single
Output
Left
Output Diameter (in)
2.000
Output HP
4.263
Output Key
1/2 x 2.50
Output RPM
29
Output Shaft Assembly Code
L
Output Shaft Direction
Left
Output Shaft Orientation
L
Output Style
L
Output Torque
9212
Output Torque Range
5000 to 10000 in lbs
Output type
Solid Shaft
Overhung Load
3570
Paint/Coating
Blue
Product Line
NH Series - Ironman Narrow Housing Worm Gear Reducers
Product Type
Right Angle
Ratio
60 to 1
Ratio Range
60-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
NH Series - Ironman Narrow Housing Worm Gear Reducers
Series Code
NH
Series Style
NH-BMQ-L
Service Factor
1
Shaft Seal Material
Viton
Size
210TC
TAP Depth
1.25
Thrust Rating - output shaft
3412
Regal Beloit Grove Gear&Reg; NH8520334.00
UPC: 690310083024 | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear IRONMAN Worm Gear Reducer, Narrow Housing Right Angle Single Reduction, Series: NH Series, 60:1 Gear Ratio, 5.816 hp Input, 4.263 hp Output, C-Face Quill Input, Shaft Output, 1-3/8 in Dia Input, 2 in Dia x 4.72 in L Output, 29 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 9212 in-lb Output, 5-1/4 in Centre Distance, 5/16 x 5/32 in Input, 1/2 x 2-1/2 in Output Keyway, PAG Synthetic Oil Lubrication, Base Mount, Cast Iron
Features:
- Rugged cast iron housing, covers and flanges provide superior strength and rigidity
- Factory filled with premium Mobil Glygoyle 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Designed with industry leading premium features as standard
- Compact housing design to fit where other reducer brands cannot
Specs:
| Input Maximum Speed | 1750 rpm |
|---|---|
| Output Maximum Speed | 29 rpm |
| Centre Distance | 5-1/4 in |
| Input Type | C-Face Quill |
| Output Size | 2 in Dia x 4.72 in L |
| Input Size | 1-3/8 in Dia |
| Lubrication Type | PAG Synthetic Oil |
| Torque Rating | 9212 in-lb Output |
| Horsepower | 5.816 hp Input, 4.263 hp Output |
| Keyway Size | 5/16 x 5/32 in Input, 1/2 x 2-1/2 in Output |
| Gear Ratio | 60:1 |
| Output Type | Shaft |
| Mounting Type | Base |
| Material | Cast Iron |
| Type | Narrow Housing Right Angle Single Reduction |
| Series | NH Series |
Packaging:
Limited
SKU: 1328004
Enginiering
got what I need it the first time. no hassle, friendly customer service, communication is excellent, I am happy with the delivery time.
Read more
| Brand | NK North America Inc. |
| Model | K2121.1512005X30 |
| Brand | NK North America Inc. |
| Model | K2120.9501104X15 |
| Brand | NK North America Inc. |
| Model | K2127.153184A2X50 |
| Brand | NK North America Inc. |
| Model | K2127.25318408X30 |
| Brand | NK North America Inc. |
| Model | K2120.25114A4X30 |
| Brand | NK North America Inc. |
| Model | K2121.1512005X20 |
| Brand | NK North America Inc. |
| Model | K2127.15311A1X40 |
SKU: 1328004
Enginiering
got what I need it the first time. no hassle, friendly customer service, communication is excellent, I am happy with the delivery time.
Read more