We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Grove Gear Narrow Housing NH-BMQ852-15-R-210 (catalog NH8520340.00) is a 15:1 ratio single-reduction worm gear speed reducer with 5.25" center distance. It features a 210TC quill flange input, 1.375" input shaft diameter, and 2" solid output shaft right hand. The cast iron housing is part of the IronMan Narrow Housing series.
MODEL NH8520340.00
Contact supplier for technical support on: 800-626-2120
$5,128.87 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Assembly
BMQ-R
Center Distance
5.2 In.
Center distance (in)
5.25
Center Distance Range
Above 3.25"
Gear Drive Reductions
Single
Gear Type
Worm
H-Tap Size
5/8 - 11 UNC
Housing material
Cast iron
HP Range
15 HP (< 20)
Input Bore (C Face)
1.375
Input Diameter (in)
1.375
Input Flange
210TC
Input HP
18.11
Input HP @ 1750 RPM
18.11
Input Keyway (C Face)
5/16 x 5/32
Input RPM
1750
Input Style
Quill
Max OHL (Output Shaft)
3560
Max Thrust Load (Output Shaft)
3033
Model Code
BMQ852
Motor Frame Size
210
Mounting Style
Base
No. of Gear Reductions
Single
Output
Right
Output Diameter (in)
2.000
Output HP
16.55
Output Key
1/2 x 2.50
Output RPM
116
Output Shaft Assembly Code
R
Output Shaft Direction
Right
Output Shaft Orientation
R
Output Style
R
Output Torque
8941
Output Torque Range
5000 to 10000 in lbs
Output type
Solid Shaft
Overhung Load
3560
Paint/Coating
Blue
Product Line
NH Series - Ironman Narrow Housing Worm Gear Reducers
Product Type
Right Angle
Ratio
15 to 1
Ratio Range
15-1
Reducer
Worm - Right Angle
Reducer Style
Worm - Right Angle
Reducer Type
Single
Series
NH Series - Ironman Narrow Housing Worm Gear Reducers
Series Code
NH
Series Style
NH-BMQ-R
Service Factor
1
Shaft Seal Material
Viton
Size
210TC
TAP Depth
1.25
Thrust Rating - output shaft
3033
Regal Beloit Grove Gear&Reg; NH8520340.00
UPC: 690310083048 | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear IRONMAN Worm Gear Reducer, Narrow Housing Right Angle Single Reduction, Series: NH Series, 15:1 Gear Ratio, 18.11 hp Input, 16.55 hp Output, C-Face Quill Input, Shaft Output, 1-3/8 in Dia Input, 2 in Dia x 4.72 in L Output, 116 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 8941 in-lb Output, 5-1/4 in Centre Distance, 5/16 x 5/32 in Input, 1/2 x 2-1/2 in Output Keyway, PAG Synthetic Oil Lubrication, Base Mount, Cast Iron
Features:
- Rugged cast iron housing, covers and flanges provide superior strength and rigidity
- Factory filled with premium Mobil Glygoyle 460 PAG lubricant
- Large oil capacity provides positive splash lubrication and superior cooling capability
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- O-rings on all bearing covers, eliminating gaskets, sealants and leaks
- Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
- Tapered roller bearings on output shaft for high overhung and thrust load capacities
- The unique quill seal guard protects the input seal from damage during motor installation
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Designed with industry leading premium features as standard
- Compact housing design to fit where other reducer brands cannot
Specs:
| Input Maximum Speed | 1750 rpm |
|---|---|
| Output Maximum Speed | 116 rpm |
| Centre Distance | 5-1/4 in |
| Input Type | C-Face Quill |
| Output Size | 2 in Dia x 4.72 in L |
| Input Size | 1-3/8 in Dia |
| Lubrication Type | PAG Synthetic Oil |
| Torque Rating | 8941 in-lb Output |
| Horsepower | 18.11 hp Input, 16.55 hp Output |
| Keyway Size | 5/16 x 5/32 in Input, 1/2 x 2-1/2 in Output |
| Gear Ratio | 15:1 |
| Output Type | Shaft |
| Mounting Type | Base |
| Material | Cast Iron |
| Type | Narrow Housing Right Angle Single Reduction |
| Series | NH Series |
Packaging:
Limited
SKU: 1318956
Replacement for an obsolete gearbox
We needed this gearbox as a replacement for an obsolete model made by Grove Gear back in the 90's. Needed to call the company to find out the equivalent and they directed me towards MRO. If this one will last as long as its predecessor I'll be retired by the time it will need to be replaced again.
Read moreSKU: 1318238
Right on
Took a bit to ship but after it shipped I got it fast. Right product.
Read moreSKU: 1318956
Replacement for an obsolete gearbox
We needed this gearbox as a replacement for an obsolete model made by Grove Gear back in the 90's. Needed to call the company to find out the equivalent and they directed me towards MRO. If this one will last as long as its predecessor I'll be retired by the time it will need to be replaced again.
Read moreSKU: 1318238
Right on
Took a bit to ship but after it shipped I got it fast. Right product.
Read more