$1,250.54 Each Prices subject to change
We never sell your data to third parties
Dodge 26Q60L56 TIGEAR-2 worm gear speed reducer, 60:1 ratio, quill input, left side solid output shaft 1.25" diameter, 56C flange, 2.6" center distance. Cast iron housing with green paint, 1.08 HP input rating, 29 rpm maximum output speed. Maintenance-free design with synthetic lubricant.
MODEL 26Q60L56
Contact supplier for technical support on: +1-864-284-5700
$1,367.25 Each
Prices are subject to change
THIS ORDER SHIPS FREE
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
#151581
Brand
Dodge
Model
26BASE
#141974
Brand
Dodge
Model
23Q60L56
#142043
Brand
Dodge
Model
26Q60R56
#25976
Brand
Baldor
Model
VWDM3538
Base to output center height
2.8700 in, 72.898 mm
Capacity
1.08 HP input, 1547 in-lb output torque
Case size
26
Center Distance
2.6" case size
Center distance (in)
2.6 in, Center distance (in):2.6300 in, 66.802 mm
Center to end of shaft distance
5.6300 in, 143.002 mm
Finish
Green
Frame
56C flange
Gearbox component type
Gearbox
Horsepower rating input
1.0800 hp, 0.805 kW
Horsepower rating output
0.7200 hp, 0.537 kW
Housing
Cast iron
Housing material
Cast iron
Input
Quill type
Input flange
56C
Input HP
1.08
Input style
Quill
Lubrication type
PAG, standard temperature
Material
Class 30 grey iron
Max RPM
29 rpm
Motor compatibility
NEMA motor, 56C frame
Mounting bolt pattern length
6.3800 in, 162.052 mm
Mounting bolt pattern width
3.3800 in, 85.852 mm
Nominal ratio
60
Output
Left side solid shaft, 1.1250" diameter
Output bore/shaft diameter
1.25 in
Output horse power
0.72
Output shaft
Left (solid A)
Output shaft center to input motor mounting face distance
5.4900 in, 139.446 mm
Output style
Left
Overhung load
1610 lbf, 7161.637 N
Paint type
Standard
Paint/coating
Green
Rated torque output
1547 in/lb, 1547.0 in/lb
Ratio
60:1 reduction
Seal type
Single-lip contact
Shaft diameter output
1.1250 in, 28.575 mm
Shaft length output
2.6700 in, 67.818 mm
Suitable for washdown
No
Thermal horsepower rating
1.5700 hp, 1.171 kW
Specifications
- Catalog Number: 26Q60L56
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 60:1
- Output Style: Left Side Solid Output Shaft
- Output Shaft Diameter: 1.25"
- Input Style: Quill
- Frame: 56C
- Center Distance: 2.6"
- Case Size: 26
- Housing Material: Cast Iron
- Paint: Green
- Weight: 49.9100 lb
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreHow should I store a Dodge gearbox over the off-season? This product
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails? This product
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands? This product
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
#1328598
Brand
Electra/Grove Gear
Model
GR8150188.00
#1329913
Brand
Electra/Grove Gear
Model
GR8240154.00
#1340509
Brand
Electra/Grove Gear
Model
GRG8260043.00
#1340506
Brand
Electra/Grove Gear
Model
GRG8260040.00
#1340620
Brand
Electra/Grove Gear
Model
GRG8260154.00
#1342485
Brand
Electra/Grove Gear
Model
GRL8260154.00
#1345265
Brand
Electra/Grove Gear
Model
NH8240154.00
#1771655
Brand
HubCity
Model
0270-08237
#1360678
Brand
Saginaw Control
Model
SCE-20EL1606SSLP
#1360879
Brand
Saginaw Control
Model
SCE-484812WFLP
#2335628
Brand
MasterDrive
Model
3020-1.11/16
#2839159
Brand
Hammond Power Solutions
Model
SG3A0300KK
#677394
Brand
Bando
Model
180J10
#2934463
Brand
Dixon
Model
DNOG5
#2408888
Brand
Winsmith
Model
E13MDDS31100C1
#1012505
Brand
Hubbell Wiring
Model
022291022
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/