We never sell your data to third parties
Dodge 30Q20L14WP TIGEAR-2 worm gear speed reducer, 20:1 ratio, 3" center distance, quill input, left side solid output shaft 1.375" diameter, 140TC frame, white epoxy paint, cast iron housing. 3.81 HP input rating, 3.26 HP output, 2,345 in-lb torque. Ventless, maintenance-free design with synthetic lubricant for right-angle power transmission in food, pharmaceutical, and washdown applications.
MODEL 30Q20L14WP
Contact supplier for technical support on: +1-864-284-5700
$1,787.95 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
#149918
Brand
Dodge
Model
30S05RWP
#152129
Brand
Dodge
Model
30AZ15LR14WP
#144620
Brand
Dodge
Model
30AZ10L18WP
#142162
Brand
Dodge
Model
30Q05L18WP
Base to output center height
3.2500 in, 82.55 mm
Case size
30
Center Distance
3" worm to gear centerline
Center distance (in)
3 in, Center distance (in):3.0000 in, 76.2 mm
Center to end of shaft distance
6.7500 in, 171.45 mm
Finish
White epoxy
Gearbox component type
Gearbox
Horsepower rating input
3.8100 hp, 2.841 kW
Horsepower rating output
3.2600 hp, 2.431 kW
Housing material
Cast iron
Housing Material
Cast iron
Input
140TC flange
Input flange
140TC
Input HP
3.81
Input style
Quill
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 140TC frame
Motor Flange
140TC NEMA C-face frame compatibility
Mounting bolt pattern length
7.0000 in, 177.8 mm
Mounting bolt pattern width
4.0000 in, 101.6 mm
Nominal ratio
20
Output
Left side solid output shaft
Output bore/shaft diameter
1.375 in
Output Configuration
Left side solid output shaft, 1.3750" diameter
Output horse power
3.26
Output shaft center to input motor mounting face distance
6.1100 in, 155.194 mm
Output style
Left
Overhung load
2300 lbf, 10230.91 N
Paint Finish
White paint
Paint type
White epoxy
Paint/coating
White
Power Rating
3.81 HP input capacity
Rated torque output
2345 in/lb, 2345.0 in/lb
Ratio
20:1 reduction ratio
Reducer Family
TIGEAR-2 worm gear speed reducer
Seal type
Single-lip contact
Shaft diameter output
1.3750 in, 34.925 mm
Shaft length output
3.2000 in, 81.28 mm
Suitable for washdown
No
Thermal horsepower rating
4.5200 hp, 3.371 kW
Torque Output
2, 345 in-lb maximum torque
Specifications
- Catalog Number: 30Q20L14WP
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 20:1
- Output Style: Left Side Solid Output Shaft
- Output Shaft Diameter: 1.375"
- Input Style: Quill
- Frame: 140TC
- Center Distance: 3"
- Case Size: 30
- Housing Material: Cast Iron
- Paint: White
- Weight: 89.0000 lb
SKU: 117869
Great price/great product
Shipping was fast and the price was best I could find. Product was new in a the sealed Dodge box. Perfect.
Read moreSKU: 128914
Recent purchase
My order with MRO was easy, quick and priced just right! Assistance over the phone was professional and helpful. I will be making more orders in the future. JG
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreHow should I store a Dodge gearbox over the off-season? This product
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails? This product
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands? This product
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
#1331759
Brand
Electra/Grove Gear
Model
GR8300221.00
#6001532
Brand
Winsmith
Model
U3020SL14
#2848211
Brand
Cooper Wiring
Model
AHL1430P
#565194
Brand
Linn Gear
Model
1030C10
#6103933
Brand
JET Tools
Model
321291
#1381509
Brand
Isostatic
Model
CB-2832-12
#6083223
Brand
Dormer Pramet
Model
5978455
#6263953
Brand
Royal Products
Model
22027
#119319
Brand
Dodge
Model
119248
#264666
Brand
Martin Sprocket
Model
62C20
SKU: 117869
Great price/great product
Shipping was fast and the price was best I could find. Product was new in a the sealed Dodge box. Perfect.
Read moreSKU: 128914
Recent purchase
My order with MRO was easy, quick and priced just right! Assistance over the phone was professional and helpful. I will be making more orders in the future. JG
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/