We never sell your data to third parties
Dodge 30Q10LR14 TIGEAR-2 worm gear speed reducer with 10:1 ratio, quill input, double solid output shaft 1.375" diameter, 140TC flange, and 3" center distance. Class 30 grey iron housing with green paint. 7.11 HP input rating, 6.52 HP output, 175 rpm maximum output speed. Cast iron construction with synthetic lubricant for maintenance-free operation in right-angle applications.
MODEL 30Q10LR14
Contact supplier for technical support on: +1-864-284-5700
$1,796.42 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Base to output center height
3.2500 in, 82.55 mm
Case size
30
Center Distance
3 inches
Center distance (in)
3 in, Center distance (in):3.0000 in, 76.2 mm
Center to end of shaft distance
6.7500 in, 171.45 mm
Finish
Green paint
Frame Size
140TC flange
Gearbox component type
Gearbox
Horsepower rating input
7.1100 hp, 5.302 kW
Horsepower rating output
6.5200 hp, 4.862 kW
Housing material
Cast iron
Housing Material
Cast iron
Input
140TC flange
Input flange
140TC
Input HP
7.11
Input style
Quill
Input Type
Quill input
Lubrication type
PAG, standard temperature
Material
Class 30 grey iron
Max RPM
175 rpm
Motor compatibility
NEMA motor, 140TC frame
Mounting bolt pattern length
7.0000 in, 177.8 mm
Mounting bolt pattern width
4.0000 in, 101.6 mm
Nominal ratio
10
Output
Double solid output shaft
Output bore/shaft diameter
1.375 in
Output horse power
6.52
Output shaft
Double (solid)
Output shaft center to input motor mounting face distance
6.1100 in, 155.194 mm
Output Shaft Diameter
1.3750 inches
Output style
Left, right
Output Torque
2, 347 in-lb
Overhung load
1720 lbf, 7650.941 N
Paint type
Standard
Paint/coating
Green
Power Rating
7.11 HP input
Rated torque output
2347 in/lb, 2347.0 in/lb
Ratio
10:1 reduction
Reducer Type
TIGEAR-2 worm gear speed reducer
Seal type
Single-lip contact
Shaft diameter output
1.3750 in, 34.925 mm
Shaft length output
3.2000 in, 81.28 mm
Suitable for washdown
No
Thermal horsepower rating
7.8500 hp, 5.854 kW
Specifications
- Catalog Number: 30Q10LR14
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 10:1
- Output Style: Double Solid Output Shaft
- Output Shaft Diameter: 1.375"
- Input Style: Quill
- Frame: 140TC
- Center Distance: 3"
- Case Size: 30
- Housing Material: Cast Iron
- Paint: Green
- Weight: 89.0000 lb
How should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
#5009763
Brand
Dodge
Model
30A15L18FH
#142214
Brand
Dodge
Model
30Q10LR14
#149721
Brand
Dodge
Model
30QZ05L18
#142696
Brand
Dodge
Model
30BASE
#5009771
Brand
Dodge
Model
30A20L14SB
#1331781
Brand
Electra/Grove Gear
Model
GR8300243.00
#6001448
Brand
Winsmith
Model
U3010SB14
| Brand | United Abrasives |
| Model | 23020 |
| Brand | Gates Rubber |
| Model | 14ADV-994-37 |
| Brand | G & G |
| Model | 112F2221 |
| Brand | Gates Rubber |
| Model | T10-950-25 |
| Brand | Timken Belts |
| Model | A144R |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/