We never sell your data to third parties
Dodge 47Q15LR21 TIGEAR-2 worm gear speed reducer with 15:1 ratio, double solid output shaft, quill input, and 210TC frame. 4.75" center distance, 14.05 HP input rating, 6,739 in-lb output torque. Cast iron housing with green paint.
MODEL 47Q15LR21
Contact supplier for technical support on: +1-864-284-5700
$5,936.97 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Base to output center height
5.3100 in, 134.874 mm
Case size
47
Case Size
47 (largest TIGEAR-2 frame)
Center Distance
4.75"
Center distance (in)
4.7 in, Center distance (in):4.7500 in, 120.65 mm
Center to end of shaft distance
9.0600 in, 230.124 mm
Finish
Green
Frame Size
210TC NEMA C-Face
Gear Ratio
15:1
Gearbox component type
Gearbox
Horsepower rating input
14.0500 hp, 10.477 kW
Horsepower rating output
12.4700 hp, 9.299 kW
Housing material
Cast iron
Housing Material
Cast Iron Class 30
Input
210TC flange
Input flange
210TC
Input HP
14.05
Input Power Rating
14.05 HP
Input style
Quill
Input Type
Quill Input
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 210TC frame
Mounting bolt pattern length
11.0000 in, 279.4 mm
Mounting bolt pattern width
5.8100 in, 147.574 mm
Nominal ratio
15
Output
Double solid output shaft
Output bore/shaft diameter
2 in
Output horse power
12.47
Output shaft
Double (solid)
Output shaft center to input motor mounting face distance
9.4700 in, 240.538 mm
Output Shaft Diameter
2.0000"
Output style
Left, right
Output Torque
6, 739 in-lb
Overhung load
5600 lbf, 24910.041 N
Paint type
Standard
Paint/coating
Green
Product Type
TIGEAR-2 Worm Gear Speed Reducer
Rated torque output
6739 in/lb, 6739.0 in/lb
Ratio
15 to 1
Seal type
Single-lip contact
Shaft diameter output
2.0000 in, 50.8 mm
Shaft length output
4.0100 in, 101.854 mm
Suitable for washdown
No
Thermal horsepower rating
14.1400 hp, 10.544 kW
Specifications
- Catalog Number: 47Q15LR21
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 15:1
- Output Style: Double Solid Output Shaft
- Output Shaft Diameter: 2"
- Input Style: Quill
- Frame: 210TC
- Center Distance: 4.75"
- Case Size: 47
- Housing Material: Cast Iron
- Paint: Green
- Weight: 210.0000 lb
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 127693
Re-seller discount needed
Quick delivery, but I think you should raise your prices for end users and lower your prices for resellers like myself!
Read more
#5010388
Brand
Dodge
Model
47Q07R18
#143867
Brand
Dodge
Model
47A40LR18
#5010390
Brand
Dodge
Model
47Q07R21
#5010397
Brand
Dodge
Model
47Q10R18
#153453
Brand
Dodge
Model
47A10R25
| Brand | Pramet |
| Model | CNMG 433-NM:T8315 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-340100 |
| Brand | Pramet |
| Model | WNMG 332-NM:T8315 |
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 127693
Re-seller discount needed
Quick delivery, but I think you should raise your prices for end users and lower your prices for resellers like myself!
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/