We never sell your data to third parties
Dodge 30Q05H18 TIGEAR-2 worm gear speed reducer with 5:1 ratio, 3" center distance, quill input, hollow bore output, and 180TC flange. Cast iron housing with green paint finish, 10.84 HP input capacity, 1.9375" output bore diameter. Totally enclosed, ventless design with synthetic lubricant for maintenance-free operation in right-angle applications.
MODEL 30Q05H18
Contact supplier for technical support on: +1-864-284-5700
$2,283.34 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
#152295
Brand
Dodge
Model
30QZ20LR18
#143409
Brand
Dodge
Model
30A40LR14
#149496
Brand
Dodge
Model
30Q05R14
#5009753
Brand
Dodge
Model
30A10L18FH
Base to output center height
3.2500 in, 82.55 mm
Bore dia output
1.9380 in, 49.225 mm
Bore length
7.7600 in, 197.104 mm
Case size
30
Center Distance
3" (case size 30)
Center distance (in)
3 in, Center distance (in):3.0000 in, 76.2 mm
Finish
Green
Gear Type
TIGEAR-2 worm gear right angle
Gearbox component type
Gearbox
Horsepower rating input
10.8400 hp, 8.083 kW
Horsepower rating output
10.2700 hp, 7.658 kW
Housing
Cast iron
Housing material
Cast iron
Input
180TC flange
Input Configuration
Quill input
Input flange
180TC
Input HP
10.84
Input style
Quill
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 180TC frame
Motor Frame
180TC C-face flange
Mounting bolt pattern length
7.0000 in, 177.8 mm
Mounting bolt pattern width
4.0000 in, 101.6 mm
Nominal ratio
5
Output
Hollow bore 1.9375" diameter
Output bore/shaft diameter
1.9375 in
Output horse power
10.27
Output shaft
Hollow
Output shaft center to input motor mounting face distance
7.1400 in, 181.356 mm
Output style
Hollow
Output Torque
1, 849 in-lb
Overhung load
1330 lbf, 5916.135 N
Paint type
Standard
Paint/coating
Green
Power Rating
10.84 HP input capacity
Rated torque output
1849 in/lb, 1849.0 in/lb
Ratio
5:1 reduction ratio
Seal type
Single-lip contact
Suitable for washdown
No
Thermal horsepower rating
12.5300 hp, 9.344 kW
Specifications
- Catalog Number: 30Q05H18
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 5:1
- Output Style: Hollow Bore
- Output Shaft Diameter: 1.9375"
- Input Style: Quill
- Frame: 180TC
- Center Distance: 3"
- Case Size: 30
- Housing Material: Cast Iron
- Paint: Green
- Weight: 89.0000 lb
SKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreSKU: 704413
Perfect fit and finish
Good product, perfect fit and finish, good price and fast shipping. Thanks
Read moreHow should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
| Brand | KSM |
| Model | 1310 K |
SKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreSKU: 704413
Perfect fit and finish
Good product, perfect fit and finish, good price and fast shipping. Thanks
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/