We never sell your data to third parties
Dodge 17A10L56WP TIGEAR-2 worm gear speed reducer, 10:1 ratio, 3-piece coupled input, left side solid output shaft 0.875" diameter, 56C flange, 1.7" center distance, 1.67 HP input rating, cast iron housing, white epoxy paint. Right-angle worm gear design with quill input option for compact motor mounting. Totally enclosed, ventless, maintenance-free construction with synthetic lubricant fill. Suitable for Class I and II applications including conveyors, mixers, and packaging machinery.
MODEL 17A10L56WP
Contact supplier for technical support on: +1-864-284-5700
$1,069.84 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
#149087
Brand
Dodge
Model
17AZ15L14WP
#142970
Brand
Dodge
Model
17A10L56WP
#152086
Brand
Dodge
Model
17AZ05L56WP
#152336
Brand
Dodge
Model
17QZ05LR14WP
Base to output center height
1.9900 in, 50.546 mm
Case size
17
Center Distance
1.7" (case size 17)
Center distance (in)
1.7 in, Center distance (in):1.7500 in, 44.45 mm
Center to end of shaft distance
4.3100 in, 109.474 mm
Finish
White epoxy
Frame Size
56C NEMA C-face flange mounting
Gear Ratio
10:1 reduction ratio
Gearbox component type
Gearbox
Horsepower rating input
1.6700 hp, 1.245 kW
Horsepower rating output
1.4800 hp, 1.104 kW
Housing material
Cast iron
Input
56C flange
Input Configuration
3-piece coupled input
Input flange
56C
Input HP
1.67
Input style
3-Piece coupled
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 56C frame
Mounting bolt pattern length
4.1900 in, 106.426 mm
Mounting bolt pattern width
2.7500 in, 69.85 mm
Nominal ratio
10
Output
Left side solid shaft, 0.8750" diameter
Output bore/shaft diameter
0.875 in
Output horse power
1.48
Output shaft center to input motor mounting face distance
7.7300 in, 196.342 mm
Output style
Left
Overhung load
1190 lbf, 5293.384 N
Paint type
White epoxy
Paint/coating
White
Power Rating
1.67 HP input rating
Rated torque output
534 in/lb, 534.0 in/lb
Ratio
10 to 1
Seal type
Single-lip contact
Shaft diameter output
0.8750 in, 22.225 mm
Shaft length output
1.7400 in, 44.196 mm
Suitable for washdown
No
Thermal horsepower rating
2.7600 hp, 2.058 kW
Torque Rating
534 in-lb output torque capacity
Specifications
- Catalog Number: 17A10L56WP
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 10:1
- Output Style: Left Side Solid Output Shaft
- Output Shaft Diameter: 0.875"
- Input Style: 3-Piece Coupled
- Frame: 56C
- Center Distance: 1.7"
- Case Size: 17
- Housing Material: Cast Iron
- Paint: White
- Weight: 46.0000 lb
SKU: 2835296
E20
This is exactly what I needed. Price was way below my local business that carries couplings. Thanks.
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreHow should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
#5999945
Brand
Winsmith
Model
U1810SL56
| Brand | U.S. Seal Mfg. |
| Model | PS-3161 |
| Brand | BLACKSTAR |
| Model | BLS E 35MM |
SKU: 2835296
E20
This is exactly what I needed. Price was way below my local business that carries couplings. Thanks.
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/