We never sell your data to third parties
Dodge 30A50R56WP TIGEAR-2 worm gear speed reducer with 50:1 ratio, 3-piece coupled input, right side solid output shaft 1.375" diameter, 56C flange, 3" center distance, 1.75 HP input rating, cast iron housing, white epoxy finish. Suitable for moderate shock applications requiring right-angle speed reduction with easy motor separation.
MODEL 30A50R56WP
Contact supplier for technical support on: +1-864-284-5700
$2,075.18 Each
Prices are subject to change
THIS ORDER SHIPS FREE
Select Quantity
Typically Ships in: 1 day
Returnable:No
#142647
Brand
Dodge
Model
30ZBASEWP
#144614
Brand
Dodge
Model
30AZ05R14WP
#151801
Brand
Dodge
Model
30A05LR14WP
#144613
Brand
Dodge
Model
30AZ05LR18WP
Base to output center height
3.2500 in, 82.55 mm
Case size
30
Center Distance
3" worm gear center distance
Center distance (in)
3 in, Center distance (in):3.0000 in, 76.2 mm
Center to end of shaft distance
6.7500 in, 171.45 mm
Finish
White epoxy
Gear Ratio
50:1 reduction
Gearbox component type
Gearbox
Horsepower rating input
1.7500 hp, 1.305 kW
Horsepower rating output
1.2500 hp, 0.932 kW
Housing
Cast iron
Housing material
Cast iron
Input
56C flange
Input flange
56C
Input HP
1.75
Input style
3-Piece coupled
Input Type
3-piece coupled input
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 56C frame
Motor Flange
56C NEMA frame compatibility
Mounting bolt pattern length
7.0000 in, 177.8 mm
Mounting bolt pattern width
4.0000 in, 101.6 mm
Nominal ratio
50
Output
Right side solid output shaft
Output bore/shaft diameter
1.375 in
Output Configuration
Right side solid output shaft, 1.3750" diameter
Output horse power
1.25
Output shaft center to input motor mounting face distance
9.2300 in, 234.442 mm
Output style
Right
Output Torque
2, 257 in-lb maximum
Overhung load
2300 lbf, 10230.91 N
Paint type
White epoxy
Paint/coating
White
Power Rating
1.75 HP input capacity
Rated torque output
2257 in/lb, 2257.0 in/lb
Ratio
50 to 1
Reducer Family
TIGEAR-2 worm gear speed reducer
Seal type
Single-lip contact
Shaft diameter output
1.3750 in, 34.925 mm
Shaft length output
3.2000 in, 81.28 mm
Suitable for washdown
No
Thermal horsepower rating
2.3400 hp, 1.745 kW
Specifications
- Catalog Number: 30A50R56WP
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 50:1
- Output Style: Right Side Solid Output Shaft
- Output Shaft Diameter: 1.375"
- Input Style: 3-Piece Coupled
- Frame: 56C
- Center Distance: 3"
- Case Size: 30
- Housing Material: Cast Iron
- Paint: White
- Weight: 95.0000 lb
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 2835296
E20
This is exactly what I needed. Price was way below my local business that carries couplings. Thanks.
Read moreSKU: 118299
Prompt & great service
As usual MRO Supply team are quick in shipping the ordered parts correctly without any delay.. Will shop online again confidently knowing they offer very good and prompt service!
Read moreHow should I store a Dodge gearbox over the off-season? This product
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails? This product
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands? This product
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
#1331739
Brand
Electra/Grove Gear
Model
GR8300201.00
#6001698
Brand
Winsmith
Model
U3050SR56
#2363879
Brand
Link-Belt
Model
10439834
#1019770
Brand
Hubbell Wiring
Model
HBL1557
#142010
Brand
Dodge
Model
23Q30LR56WP
#6302037
Brand
Starrett
Model
81-144JN/S
#2392050
Brand
Harwal
Model
35 x 08VK
#96908319
Brand
AXIS
Model
AXS 1641 2RS
#1016637
Brand
Hubbell Wiring
Model
CSB215I
#141979
Brand
Dodge
Model
23Q10LR18WP
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 2835296
E20
This is exactly what I needed. Price was way below my local business that carries couplings. Thanks.
Read moreSKU: 118299
Prompt & great service
As usual MRO Supply team are quick in shipping the ordered parts correctly without any delay.. Will shop online again confidently knowing they offer very good and prompt service!
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/