We never sell your data to third parties
Dodge 40A30L18WP TIGEAR-2 worm gear speed reducer, 30:1 ratio, 3-piece coupled input, left side solid output shaft 1.875" diameter, 180TC flange, 4" center distance, 5.61 HP rating, 4898 in-lb output torque, cast iron housing, white paint finish. - Ratio: 30:1
- Center Distance: 4"
- Input: 180TC Flange
- Output Bore/Shaft Diameter: 1.875"
- Output: Left Side Solid Output Shaft
- Paint/Coating: White
- Housing Material: Cast Iron
- Housing Material: Cast Iron
- Input Horse Power: 5.61
- Output Horse Power: 4.53
MODEL 40A30L18WP
Contact supplier for technical support on: +1-864-284-5700
$4,457.56 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Base to output center height
4.4400 in, 112.776 mm
Case size
40
Center distance (in)
4 in, Center distance (in):4.0000 in, 101.6 mm
Center to end of shaft distance
8.1200 in, 206.248 mm
Finish
White epoxy
Gearbox component type
Gearbox
Horsepower rating input
5.6100 hp, 4.183 kW
Horsepower rating output
4.5300 hp, 3.378 kW
Housing material
Cast iron
Input
180TC flange
Input flange
180TC
Input HP
5.61
Input style
3-Piece coupled
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 180TC frame
Mounting bolt pattern length
8.5000 in, 215.9 mm
Mounting bolt pattern width
5.0000 in, 127.0 mm
Nominal ratio
30
Output
Left side solid output shaft
Output bore/shaft diameter
1.875 in
Output horse power
4.53
Output shaft center to input motor mounting face distance
12.5700 in, 319.278 mm
Output style
Left
Overhung load
4300 lbf, 19127.353 N
Paint type
White epoxy
Paint/coating
White
Rated torque output
4898 in/lb, 4898.0 in/lb
Ratio
30 to 1
Seal type
Single-lip contact
Shaft diameter output
1.8750 in, 47.625 mm
Shaft length output
3.7600 in, 95.504 mm
Suitable for washdown
No
Thermal horsepower rating
5.7800 hp, 4.31 kW
- Gear Type: Right-angle worm gear design
- Reduction Ratio: 30:1 gear reduction
- Input Configuration: 3-piece coupled input for easy motor separation
- Output Shaft: Left side solid output, 1.875" diameter
- Motor Flange: 180TC NEMA C-face input
- Center Distance: 4.0" worm to gear center distance
- Power Rating: 5.61 HP input capacity
- Output Torque: 4,898 in-lb maximum torque
- Housing: Cast iron construction, white paint finish
- Applications: Conveyor drives, mixers, agitators, pumps, general industrial machinery
SKU: 117408
P90 coupler
These where a perfect match saved me time and money by getting them fro you guys
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read more
| Brand | Hubbell Wiring |
| Model | MSL2SG000 |
| Brand | MRO Supply |
| Model | AL-DC400 |
SKU: 117408
P90 coupler
These where a perfect match saved me time and money by getting them fro you guys
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/