$2,223.10 Each Prices subject to change
We never sell your data to third parties
Dodge 30A20H14 TIGEAR-2 worm gear speed reducer with 20:1 ratio, 3-piece coupled input, hollow bore output, and 140TC flange, 3" center distance. Class 30 grey iron housing with green paint finish. Rated 3.81 HP input, 3.26 HP output, 2345 in-lb output torque, 88 rpm maximum. 1.9375" output bore diameter.
MODEL 30A20H14
Contact supplier for technical support on: +1-864-284-5700
$2,430.59 Each
Prices are subject to change
THIS ORDER SHIPS FREE
Select Quantity
Typically Ships in: 1 day
Returnable:No
#125138
Brand
Dodge
Model
LF-SC-103
#1152846
Brand
IPTCI Bearing
Model
SARFB 204 12 G
Base to output center height
3.2500 in, 82.55 mm
Bore dia output
1.9380 in, 49.225 mm
Bore length
7.7600 in, 197.104 mm
Capacity
3.81 HP input, 2345 in-lb output torque
Case size
30
Center Distance
3" worm to gear
Center distance (in)
3 in, Center distance (in):3.0000 in, 76.2 mm
Finish
Green
Frame
140TC NEMA flange mounting
Gearbox component type
Gearbox
Horsepower rating input
3.8100 hp, 2.841 kW
Horsepower rating output
3.2600 hp, 2.431 kW
Housing material
Cast iron
Input
3-piece coupled
Input flange
140TC
Input HP
3.81
Input style
3-Piece coupled
Lubrication type
PAG, standard temperature
Material
Class 30 grey iron
Max RPM
88 rpm
Motor compatibility
NEMA motor, 140TC frame
Mounting bolt pattern length
7.0000 in, 177.8 mm
Mounting bolt pattern width
4.0000 in, 101.6 mm
Nominal ratio
20
Output
Hollow bore 1.9375" diameter, direct shaft mounting
Output bore/shaft diameter
1.9375 in
Output horse power
3.26
Output shaft
Hollow
Output shaft center to input motor mounting face distance
9.2300 in, 234.442 mm
Output style
Hollow
Overhung load
2300 lbf, 10230.91 N
Paint type
Standard
Paint/coating
Green
Rated torque output
2345 in/lb, 2345.0 in/lb
Ratio
20:1 reduction
Reducer Type
TIGEAR-2 right angle worm gear speed reducer
Seal type
Single-lip contact
Suitable for washdown
No
Thermal horsepower rating
4.5200 hp, 3.371 kW
Specifications
- Catalog Number: 30A20H14
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 20:1
- Output Style: Hollow Bore
- Output Shaft Diameter: 1.9375"
- Input Style: 3-Piece Coupled
- Frame: 140TC
- Center Distance: 3"
- Case Size: 30
- Housing Material: Cast Iron
- Paint: Green
- Weight: 95.0000 lb
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreHow should I store a Dodge gearbox over the off-season? This product
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails? This product
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands? This product
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
#6001520
Brand
Winsmith
Model
U3020HT14
#5999601
Brand
Winsmith
Model
M3020HT14
#1013421
Brand
Hubbell Wiring
Model
074093513
#678533
Brand
Bando
Model
4-5VX850
#504385
Brand
Rexnord
Model
10425896
#6236239
Brand
Reiff & Nestor
Model
46941
#677447
Brand
Bando
Model
300J4
#6427844
Brand
MRO Supply
Model
PA-13-6-3000
#5927928
Brand
Bando
Model
11B92
#6501150
Brand
WEG
Model
SSW900-KMD-CB07
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/