We never sell your data to third parties
Dodge 35AZ20LR18WP TIGEAR-2 E-Z Kleen worm gear speed reducer. 20:1 ratio, 3.5" center distance, double solid output shaft, 3-piece coupled input, 180TC frame. Cast iron housing, white epoxy paint. 5.79 HP rated, 3620 in-lb output torque. - Ratio: 20:1
- Center Distance: 3.5"
- Input: 180TC Flange
- Output Bore/Shaft Diameter: 1.5"
- Output: Double Solid Output Shaft
- Paint/Coating: White
- Housing Material: Cast Iron
- Housing Material: Cast Iron
- Input Horse Power: 5.79
- Output Horse Power: 5.03
MODEL 35AZ20LR18WP
Contact supplier for technical support on: +1-864-284-5700
$4,315.98 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Base to output center height
3.9900 in, 101.346 mm
Case size
35
Center Distance
3.5" (case size 35)
Center distance (in)
3.5 in, Center distance (in):3.5000 in, 88.9 mm
Center to end of shaft distance
7.0600 in, 179.324 mm
Finish
White epoxy
Frame
180TC motor flange
Gear Type
Right-angle worm gear reducer
Gearbox component type
Gearbox
Horsepower rating input
5.7900 hp, 4.318 kW
Horsepower rating output
5.0300 hp, 3.751 kW
Housing
Cast iron
Housing material
Cast iron
Input
180TC flange
Input flange
180TC
Input HP
5.79
Input style
3-Piece coupled
Input Type
3-piece coupled
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 180TC frame
Mounting bolt pattern length
7.5000 in, 190.5 mm
Mounting bolt pattern width
4.0000 in, 101.6 mm
Nominal ratio
20
Output
Double solid output shaft
Output bore/shaft diameter
1.5 in
Output Configuration
Double solid output shaft (left and right), 1.5" diameter
Output horse power
5.03
Output shaft center to input motor mounting face distance
11.1500 in, 283.21 mm
Output style
Left, right
Output Torque
3, 620 in-lb
Overhung load
2760 lbf, 12277.092 N
Paint
White epoxy
Paint type
White epoxy
Paint/coating
White
Power Rating
5.79 HP input capacity
Rated torque output
3620 in/lb, 3620.0 in/lb
Ratio
20:1 reduction
Seal type
Two-piece harsh duty
Shaft diameter output
1.5000 in, 38.1 mm
Shaft length output
3.5100 in, 89.154 mm
Suitable for washdown
Yes
Thermal horsepower rating
5.9700 hp, 4.452 kW
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read more
#143640
Brand
Dodge
Model
35A60R56WP
#142648
Brand
Dodge
Model
35ZBASEWP
#143616
Brand
Dodge
Model
35A10LR18WP
#143633
Brand
Dodge
Model
35A50L56WP
#142659
Brand
Dodge
Model
35ZJMOUNTWP
| Brand | Carter |
| Model | PHR-400-A |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-548608 |
| Brand | Hydraulic Technologies |
| Model | KB11 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-409127 |
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/