We never sell your data to third parties
Dodge 17AZ30LR56 E-Z Kleen TIGEAR-2 worm gear reducer with 30:1 ratio, 3-piece coupled input, double solid output shaft, 1.7" center distance, and 56C frame. Cast iron housing with green paint, 0.76 HP input rating, 0.57 HP output, and 0.875" output shaft diameter. Suitable for washdown environments with corrosion-resistant design.
MODEL 17AZ30LR56
Contact supplier for technical support on: +1-864-284-5700
$1,587.84 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Base to output center height
1.9900 in, 50.546 mm
Case size
17
Center Distance
1.7" worm gear center spacing
Center distance (in)
1.7 in, Center distance (in):1.7500 in, 44.45 mm
Center to end of shaft distance
4.3100 in, 109.474 mm
Finish
Silver-gray epoxy
Frame Size
56C NEMA C-face motor mounting flange
Gearbox component type
Gearbox
Horsepower rating input
0.7600 hp, 0.567 kW
Horsepower rating output
0.5700 hp, 0.425 kW
Housing
Cast iron
Housing material
Cast iron
Input
56C flange
Input Configuration
3-piece coupled input
Input flange
56C
Input HP
0.76
Input style
3-Piece coupled
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 56C frame
Mounting bolt pattern length
4.1900 in, 106.426 mm
Mounting bolt pattern width
2.7500 in, 69.85 mm
Nominal ratio
30
Output
Double solid output shaft
Output bore/shaft diameter
0.875 in
Output Configuration
Double solid output shafts (LR), 0.8750" diameter
Output horse power
0.57
Output shaft
Double (solid)
Output shaft center to input motor mounting face distance
7.7300 in, 196.342 mm
Output style
Left, right
Overhung load
1190 lbf, 5293.384 N
Paint type
Stainless epoxy
Paint/coating
Green
Power Rating
0.76 HP input capacity
Product Type
TIGEAR-2 E-Z Kleen right-angle worm gear speed reducer
Rated torque output
615 in/lb, 615.0 in/lb
Ratio
30 to 1
Reduction Ratio
30:1
Seal type
Two-piece harsh duty
Shaft diameter output
0.8750 in, 22.225 mm
Shaft length output
1.7400 in, 44.196 mm
Suitable for washdown
Yes
Thermal horsepower rating
1.2000 hp, 0.895 kW
Torque Rating
615 in-lb output torque capacity
Specifications
- Catalog Number: 17AZ30LR56
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 30:1
- Output Style: Double Solid Output Shaft
- Output Shaft Diameter: 0.875"
- Input Style: 3-Piece Coupled
- Frame: 56C
- Center Distance: 1.7"
- Case Size: 17
- Housing Material: Cast Iron
- Paint: Green
- Weight: 46.0000 lb
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read more
#144867
Brand
Dodge
Model
17AZ30LR56
#152057
Brand
Dodge
Model
17QZ10LR56
#144367
Brand
Dodge
Model
17QZ10LR14
#142650
Brand
Dodge
Model
17ZJMOUNT
#144362
Brand
Dodge
Model
17QZ07L56
#144251
Brand
Dodge
Model
17QZ30LR56
#152354
Brand
Dodge
Model
17QZ30LR56WP
#145333
Brand
Dodge
Model
17AZ30LR56WP
#5998515
Brand
Winsmith
Model
M1830SB56
| Brand | MROSupply Fasteners |
| Model | FSTPCK-774003 |
| Brand | AMI Bearings |
| Model | UKFX09+HS2309 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-401350 |
| Brand | Saginaw Control |
| Model | SCE-16C20ELJ |
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/