We never sell your data to third parties
Dodge 26QZ07L18 TIGEAR-2 worm gear reducer, 7:1 ratio, quill input, left side solid output shaft, 180TC flange, 2.6" center distance. Cast iron housing with green paint finish. Input horsepower 5.92, output horsepower 5.47, 1.25" output shaft diameter. Suitable for right-angle speed reduction in industrial power transmission applications.
MODEL 26QZ07L18
Contact supplier for technical support on: +1-864-284-5700
$2,170.07 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Base to output center height
2.8700 in, 72.898 mm
Case size
26
Center Distance
2.6 inches
Center distance (in)
2.6 in, Center distance (in):2.6300 in, 66.802 mm
Center to end of shaft distance
5.6300 in, 143.002 mm
Finish
Silver-gray epoxy
Gear Type
Worm gear, right-angle
Gearbox component type
Gearbox
Horsepower rating input
5.9200 hp, 4.415 kW
Horsepower rating output
5.4700 hp, 4.079 kW
Housing
Cast iron
Housing material
Cast iron
Input
180TC flange
Input flange
180TC
Input HP
5.92
Input style
Quill
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 180TC frame
Motor Frame
180TC flange mount
Mounting bolt pattern length
6.3800 in, 162.052 mm
Mounting bolt pattern width
3.3800 in, 85.852 mm
Nominal ratio
7
Output
Left side solid output shaft
Output bore/shaft diameter
1.25 in
Output Configuration
Left side solid output shaft, 1.1250" diameter
Output horse power
5.47
Output shaft
Left (solid A)
Output shaft center to input motor mounting face distance
6.5200 in, 165.608 mm
Output style
Left
Output Torque
1, 458 in-lb
Overhung load
1520 lbf, 6761.297 N
Paint type
Stainless epoxy
Paint/coating
Green
Power Rating
5.92 HP input capacity
Rated torque output
1458 in/lb, 1458.0 in/lb
Ratio
7 to 1
Reduction Ratio
7:1
Seal type
Two-piece harsh duty
Shaft diameter output
1.1250 in, 28.575 mm
Shaft length output
2.6700 in, 67.818 mm
Suitable for washdown
Yes
Thermal horsepower rating
6.8900 hp, 5.138 kW
Specifications
- Catalog Number: 26QZ07L18
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 7:1
- Output Style: Left Side Solid Output Shaft
- Output Shaft Diameter: 1.25"
- Input Style: Quill
- Frame: 180TC
- Center Distance: 2.6"
- Case Size: 26
- Housing Material: Cast Iron
- Paint: Green
- Weight: 65.0000 lb
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 5005293
Dodge conveyor bushings
The right part, in stock, easy to find, quickly shipped.
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read more
#144304
Brand
Dodge
Model
26AZ07L14
#149710
Brand
Dodge
Model
26QZ12L56
#145099
Brand
Dodge
Model
26QZ07L18
#152257
Brand
Dodge
Model
26AZ30L56
#152253
Brand
Dodge
Model
26AZ18LR56
#152121
Brand
Dodge
Model
26QZ07L18WP
#144521
Brand
Dodge
Model
26AZ07L18WP
#144305
Brand
Dodge
Model
26AZ07L18
#5999162
Brand
Winsmith
Model
M2608SL18
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 5005293
Dodge conveyor bushings
The right part, in stock, easy to find, quickly shipped.
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/