We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 26AZ30HA14 TIGEAR-2 worm gear reducer, 30:1 ratio, 3-piece coupled input, hollow bore alternate output, 140TC flange, 2.6" center distance. Cast iron housing, E-Z Kleen food-grade design. 2 HP input, 1705 in-lb output torque. - Ratio: 30:1
- Center Distance: 2.6"
- Input: 140TC Flange
- Output Bore/Shaft Diameter: 1.6875"
- Output: Hollow Bore
- Paint/Coating: Green
- Housing Material: Cast Iron
- Housing Material: Cast Iron
- Input Horse Power: 2
- Output Horse Power: 1.58
MODEL 26AZ30HA14
Contact supplier for technical support on: +1-864-284-5700
$2,922.90 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Base to output center height
2.8700 in, 72.898 mm
Bore dia output
1.6880 in, 42.875 mm
Bore length
6.6200 in, 168.148 mm
Case size
26
Center distance (in)
2.6 in, Center distance (in):2.6300 in, 66.802 mm
Finish
Silver-gray epoxy
Gearbox component type
Gearbox
Horsepower rating input
2.0000 hp, 1.491 kW
Horsepower rating output
1.5800 hp, 1.178 kW
Housing material
Cast iron
Input
140TC flange
Input flange
56C
Input HP
2
Input style
3-Piece coupled
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 140TC frame
Mounting bolt pattern length
6.3800 in, 162.052 mm
Mounting bolt pattern width
3.3800 in, 85.852 mm
Nominal ratio
30
Output
Hollow bore
Output bore/shaft diameter
1.6875 in
Output horse power
1.58
Output shaft
Hollow alternate
Output shaft center to input motor mounting face distance
8.6100 in, 218.694 mm
Output style
Hollow alternate
Overhung load
1610 lbf, 7161.637 N
Paint type
Stainless epoxy
Paint/coating
Green
Rated torque output
1705 in/lb, 1705.0 in/lb
Ratio
30 to 1
Seal type
Two-piece harsh duty
Suitable for washdown
Yes
Thermal horsepower rating
2.7900 hp, 2.081 kW
- Ratio: 30:1 reduction
- Input Type: 3-piece coupled for easy motor separation
- Output: Hollow bore alternate (HA) 1.6875" diameter
- Frame: 140TC NEMA C-face flange
- Center Distance: 2.6" worm gear arrangement
- Housing: Cast iron with E-Z Kleen white epoxy finish
- Performance: 2 HP input capacity, 1705 in-lb output torque
- Weight: 69 lbs
- Application: Food processing, pharmaceutical, washdown environments requiring sanitary design
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read more
#145707
Brand
Dodge
Model
26QZ30HA14WP
#145899
Brand
Dodge
Model
26AZ30HA14
#145676
Brand
Dodge
Model
26AZ30HA14WP
#145936
Brand
Dodge
Model
26QZ30HA14
#5999305
Brand
Winsmith
Model
M2630HQ14
#145936
Brand
Dodge
Model
26QZ30HA14
#145676
Brand
Dodge
Model
26AZ30HA14WP
#145707
Brand
Dodge
Model
26QZ30HA14WP
#5999305
Brand
Winsmith
Model
M2630HQ14
| Brand | FAG Bearing |
| Model | NU1068M1 |
| Brand | NTN Bearing |
| Model | NU308EAG1C3 |
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/