We never sell your data to third parties
Dodge 35QZ10H18 TIGEAR-2 E-Z Kleen worm gear speed reducer with 10:1 ratio, 1.9375" hollow bore output, quill input, and 180TC C-face flange. 3.5" center distance, Class 30 grey iron housing with green paint. Rated 10 HP input, 9.19 HP output, 233 rpm maximum. Silver-gray epoxy finish for corrosion resistance in washdown environments.
MODEL 35QZ10H18
Contact supplier for technical support on: +1-864-284-5700
$4,681.34 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Base to output center height
3.9900 in, 101.346 mm
Bore dia output
1.9380 in, 49.225 mm
Bore length
8.7400 in, 221.996 mm
Case size
35
Center Distance
3.5" (case size 35)
Center distance (in)
3.5 in, Center distance (in):3.5000 in, 88.9 mm
Finish
Silver-gray epoxy
Gear Ratio
10:1 single reduction
Gearbox component type
Gearbox
Horsepower rating input
10.0000 hp, 7.457 kW
Horsepower rating output
9.1900 hp, 6.853 kW
Housing material
Cast iron
Housing Material
Cast iron
Input
180TC flange
Input flange
180TC
Input HP
10
Input style
Quill
Lubrication type
PAG, standard temperature
Material
Class 30 grey iron
Max RPM
233 RPM
Motor compatibility
NEMA motor, 180TC frame
Mounting bolt pattern length
7.5000 in, 190.5 mm
Mounting bolt pattern width
4.0000 in, 101.6 mm
Nominal ratio
10
Output
Hollow bore
Output Bore
1.9375" hollow bore
Output bore/shaft diameter
1.9375 in
Output horse power
9.19
Output shaft
Hollow
Output shaft center to input motor mounting face distance
7.5500 in, 191.77 mm
Output style
Hollow
Overhung load
2700 lbf, 12010.198 N
Paint type
Stainless epoxy
Paint/coating
Green
Power Rating
10 HP input capacity
Rated torque output
3310 in/lb, 3310.0 in/lb
Ratio
10 to 1
Reducer Type
TIGEAR-2 E-Z Kleen right-angle worm gear reducer
Seal type
Two-piece harsh duty
Suitable for washdown
Yes
Thermal horsepower rating
10.6300 hp, 7.927 kW
Torque Output
3, 310 in-lb maximum
Specifications
- Catalog Number: 35QZ10H18
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 10:1
- Output Style: Hollow Bore
- Output Shaft Diameter: 1.9375"
- Input Style: Quill
- Frame: 180TC
- Center Distance: 3.5"
- Case Size: 35
- Housing Material: Cast Iron
- Paint: Green
- Weight: 109.0000 lb
SKU: 127693
Re-seller discount needed
Quick delivery, but I think you should raise your prices for end users and lower your prices for resellers like myself!
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read more
| Brand | Consolidated Bearings |
| Model | 22222 C/3 |
| Brand | NSK Bearings |
| Model | 7000CTRSULP4Y |
SKU: 127693
Re-seller discount needed
Quick delivery, but I think you should raise your prices for end users and lower your prices for resellers like myself!
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/