We never sell your data to third parties
Dodge 30S60LR TIGEAR-2 worm gear speed reducer with 60:1 ratio, solid input shaft, and double solid output shaft, 3" center distance. Cast iron housing with green paint finish. 1.5 HP input, 0.99 HP output, 0.875" input shaft diameter, 1.375" output shaft diameter. Suitable for industrial power transmission applications requiring right-angle speed reduction.
MODEL 30S60LR
Contact supplier for technical support on: +1-864-284-5700
$1,796.42 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
#149607
Brand
Dodge
Model
30S60LR
#145945
Brand
Dodge
Model
30QZ05H14
#142565
Brand
Dodge
Model
30Q05H18
#5009753
Brand
Dodge
Model
30A10L18FH
Base to output center height
3.2500 in, 82.55 mm
Case size
30
Center Distance
3" (30 case size)
Center distance (in)
3 in, Center distance (in):3.0000 in, 76.2 mm
Center to end of shaft distance
6.7500 in, 171.45 mm
Finish
Green
Gear Type
Worm gear
Gearbox component type
Gearbox
Horsepower rating input
1.5000 hp, 1.119 kW
Horsepower rating output
0.9900 hp, 0.738 kW
Housing material
Cast iron
Housing Material
Cast iron
Input
0.875 in Input Shaft
Input HP
1.5
Input style
Separate, Input style:Solid input shaft
Input Type
Separate (belt-driven)
Lubrication type
PAG, standard temperature
Mounting bolt pattern length
7.0000 in, 177.8 mm
Mounting bolt pattern width
4.0000 in, 101.6 mm
Nominal ratio
60
Output
Double solid output shaft
Output bore/shaft diameter
1.375 in
Output horse power
0.99
Output shaft
Double (solid)
Output Shaft Diameter
1.375"
Output style
Left, right
Output Torque
2, 138 in-lb
Overhung load
2300 lbf, 10230.91 N
Paint
Standard green finish
Paint type
Standard
Paint/coating
Green
Power Rating
1.5 HP input
Rated torque output
2138 in/lb, 2138.0 in/lb
Ratio
60 to 1
Reduction Ratio
60:1
Seal type
Single-lip contact
Shaft dia input
0.8750 in
Shaft diameter output
1.3750 in, 34.925 mm
Shaft length input
1.1800 in, 29.972 mm
Shaft length output
3.2000 in, 81.28 mm
Suitable for washdown
No
Thermal horsepower rating
2.0100 hp, 1.499 kW
Specifications
- Catalog Number: 30S60LR
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 60:1
- Output Style: Double Solid Output Shaft
- Output Shaft Diameter: 1.375"
- Input Style: Separate
- Center Distance: 3"
- Case Size: 30
- Housing Material: Cast Iron
- Paint: Green
- Weight: 89.0000 lb
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreHow should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
#6001727
Brand
Winsmith
Model
U3060SB00
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/