We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 17S20RWP TIGEAR-2 worm gear speed reducer with 20:1 ratio, right side solid output shaft, separate input, 1.7" center distance. Cast iron housing with white paint finish. 1.03 HP input rating, 602 in-lb output torque. - Ratio: 20:1
- Center Distance: 1.7"
- Input: 0.625" Input Shaft
- Output Bore/Shaft Diameter: 0.875"
- Output: Right Side Solid Output Shaft
- Paint/Coating: White
- Housing Material: Cast Iron
- Housing Material: Cast Iron
- Input Horse Power: 1.03
- Output Horse Power: 0.84
MODEL 17S20RWP
Contact supplier for technical support on: +1-864-284-5700
$857.12 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Base to output center height
1.9900 in, 50.546 mm
Case size
17
Center distance (in)
1.7 in, Center distance (in):1.7500 in, 44.45 mm
Center to end of shaft distance
4.3100 in, 109.474 mm
Finish
White epoxy
Horsepower rating input
1.0300 hp, 0.768 kW
Horsepower rating output
0.8400 hp, 0.626 kW
Housing material
Cast iron
Input
0.625 in Input Shaft
Input HP
1.03
Input style
Separate, Input style:Solid input shaft
Lubrication type
PAG, standard temperature
Mounting bolt pattern length
4.1900 in, 106.426 mm
Mounting bolt pattern width
2.7500 in, 69.85 mm
Nominal ratio
20
Output
Right side solid output shaft
Output bore/shaft diameter
0.875 in
Output horse power
0.84
Output style
Right
Overhung load
1190 lbf, 5293.384 N
Paint type
White epoxy
Paint/coating
White
Rated torque output
602 in/lb, 602.0 in/lb
Ratio
20 to 1
Seal type
Single-lip contact
Shaft dia input
0.6250 in
Shaft diameter output
0.8750 in, 22.225 mm
Shaft length input
1.1500 in, 29.21 mm
Shaft length output
1.7400 in, 44.196 mm
Suitable for washdown
No
Thermal horsepower rating
1.5800 hp, 1.178 kW
- Gear Type: Worm gear, right angle design
- Ratio: 20:1 reduction
- Center Distance: 1.7" (case size 17)
- Input: Separate input shaft for belt drive applications
- Output: Right side solid output shaft, 0.8750" diameter
- Power Rating: 1.03 HP input capacity
- Output Torque: 602 in-lb
- Housing: Cast iron construction with white paint finish
- Applications: Belt conveyors, fans, pumps, and general industrial equipment requiring right angle speed reduction
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read more
#149087
Brand
Dodge
Model
17AZ15L14WP
#152336
Brand
Dodge
Model
17QZ05LR14WP
#152343
Brand
Dodge
Model
17AZ15LR14WP
#152086
Brand
Dodge
Model
17AZ05L56WP
#145366
Brand
Dodge
Model
17AZ15R14WP
#142988
Brand
Dodge
Model
17S20R
#5999988
Brand
Winsmith
Model
U1820SR00
| Brand | Pramet |
| Model | 7273524 |
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/