We never sell your data to third parties
Dodge 17A07LR56 TIGEAR-2 worm gear reducer with 7:1 ratio, double solid output shafts, 3-piece coupled input, 56C motor flange, and 1.7" center distance. Cast iron housing with green paint, rated for 2.06 HP input and 1.88 HP output, with 0.875" output shaft diameter.
MODEL 17A07LR56
Contact supplier for technical support on: +1-864-284-5700
$1,058.10 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
#141842
Brand
Dodge
Model
17Q07L14
#149581
Brand
Dodge
Model
17S15LR
#141840
Brand
Dodge
Model
17Q05LR14
#153615
Brand
Dodge
Model
17BASE
Base to output center height
1.9900 in, 50.546 mm
Case size
17
Center Distance
1.7" compact case size
Center distance (in)
1.7 in, Center distance (in):1.7500 in, 44.45 mm
Center to end of shaft distance
4.3100 in, 109.474 mm
Finish
Green
Gear Type
Single-worm
Gearbox component type
Gearbox
Horsepower rating input
2.0600 hp, 1.536 kW
Horsepower rating output
1.8800 hp, 1.402 kW
Housing
Cast iron
Housing material
Cast iron
Input
56C flange
Input flange
56C
Input HP
2.06
Input style
3-Piece coupled
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 56C frame
Motor Flange
56C NEMA frame compatibility
Mounting bolt pattern length
4.1900 in, 106.426 mm
Mounting bolt pattern width
2.7500 in, 69.85 mm
Nominal ratio
7
Output
Double solid output shafts, 0.875" diameter
Output bore/shaft diameter
0.875 in
Output horse power
1.88
Output shaft
Double (solid)
Output shaft center to input motor mounting face distance
7.7300 in, 196.342 mm
Output style
Left, right
Overhung load
1190 lbf, 5293.384 N
Paint type
Standard
Paint/coating
Green
Power Rating
2.06 HP input capacity
Rated torque output
500 in/lb, 500.0 in/lb
Ratio
7:1 reduction ratio
Reducer Family
TIGEAR-2 worm gear speed reducer
Seal type
Single-lip contact
Shaft diameter output
0.8750 in, 22.225 mm
Shaft length output
1.7400 in, 44.196 mm
Suitable for washdown
No
Thermal horsepower rating
3.4200 hp, 2.55 kW
Torque Output
500 in-lb maximum
Specifications
- Catalog Number: 17A07LR56
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 7:1
- Output Style: Double Solid Output Shaft
- Output Shaft Diameter: 0.875"
- Input Style: 3-Piece Coupled
- Frame: 56C
- Center Distance: 1.7"
- Case Size: 17
- Housing Material: Cast Iron
- Paint: Green
- Weight: 46.0000 lb
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreHow should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
#5999921
Brand
Winsmith
Model
U1808SB56
| Brand | Martin Sprocket |
| Model | 50SDS35 |
| Brand | BLACKSTAR |
| Model | BLS E 2 3/16 |
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/