We never sell your data to third parties
Dodge 26A05LR18 TIGEAR-2 worm gear speed reducer with 5:1 ratio, 3-piece coupled input, double solid output shaft, 180TC flange, and 2.6" center distance. Cast iron housing with green finish, rated 7.37 HP input and 6.93 HP output. Output shaft diameter 1.25".
MODEL 26A05LR18
Contact supplier for technical support on: +1-864-284-5700
$1,758.44 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Base to output center height
2.8700 in, 72.898 mm
Case size
26
Center Distance
2.6" worm-to-gear spacing
Center distance (in)
2.6 in, Center distance (in):2.6300 in, 66.802 mm
Center to end of shaft distance
5.6300 in, 143.002 mm
Finish
Green
Frame
180TC C-face motor compatibility
Gear Type
Right-angle worm gear
Gearbox component type
Gearbox
Horsepower rating input
7.3700 hp, 5.496 kW
Horsepower rating output
6.9300 hp, 5.168 kW
Housing
Cast iron
Housing material
Cast iron
Input
180TC flange
Input flange
180TC
Input HP
7.37
Input style
3-Piece coupled
Input Style
3-piece coupled
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 180TC frame
Mounting bolt pattern length
6.3800 in, 162.052 mm
Mounting bolt pattern width
3.3800 in, 85.852 mm
Nominal ratio
5
Output
Double solid output shaft
Output bore/shaft diameter
1.25 in
Output horse power
6.93
Output shaft
Double (solid)
Output shaft center to input motor mounting face distance
9.5600 in, 242.824 mm
Output style
Left, right
Output Torque
1247 in-lb
Overhung load
1330 lbf, 5916.135 N
Paint type
Standard
Paint/coating
Green
Power Rating
7.37 HP input capacity
Rated torque output
1247 in/lb, 1247.0 in/lb
Ratio
5:1 reduction
Seal type
Single-lip contact
Shaft diameter output
1.1250 in, 28.575 mm
Shaft length output
2.6700 in, 67.818 mm
Suitable for washdown
No
Thermal horsepower rating
8.7900 hp, 6.555 kW
Specifications
- Catalog Number: 26A05LR18
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 5:1
- Output Style: Double Solid Output Shaft
- Output Shaft Diameter: 1.25"
- Input Style: 3-Piece Coupled
- Frame: 180TC
- Center Distance: 2.6"
- Case Size: 26
- Housing Material: Cast Iron
- Paint: Green
- Weight: 69.0000 lb
SKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreHow should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
#5009658
Brand
Dodge
Model
26S18L
#5009539
Brand
Dodge
Model
26Q12R56
#5009419
Brand
Dodge
Model
26A12R56
#5009451
Brand
Dodge
Model
26A18R56
#151581
Brand
Dodge
Model
26BASE
| Brand | Berliss |
| Model | BSP-361V SC |
| Brand | Gates Rubber |
| Model | 14ADV-994-68 |
| Brand | Gates Rubber |
| Model | 5L440 |
SKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/