We never sell your data to third parties
Dodge 35A20H14 TIGEAR-2 worm gear speed reducer with 20:1 ratio, 3-piece coupled input, hollow bore output, and 140TC flange. 3.5" center distance, cast iron housing, green finish. 5.79 HP input rating, 5.03 HP output, 1.9375" output bore. Suitable for right-angle power transmission in industrial applications requiring compact, maintenance-free operation.
MODEL 35A20H14
Contact supplier for technical support on: +1-864-284-5700
$3,213.23 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Base to output center height
3.9900 in, 101.346 mm
Bore dia output
1.9380 in, 49.225 mm
Bore length
8.7400 in, 221.996 mm
Case size
35
Center Distance
3.5" worm gear center distance
Center distance (in)
3.5 in, Center distance (in):3.5000 in, 88.9 mm
Finish
Green
Gearbox component type
Gearbox
Horsepower rating input
5.7900 hp, 4.318 kW
Horsepower rating output
5.0300 hp, 3.751 kW
Housing
Cast iron
Housing material
Cast iron
Input
140TC flange
Input flange
140TC
Input HP
5.79
Input style
3-Piece coupled
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 140TC frame
Mounting bolt pattern length
7.5000 in, 190.5 mm
Mounting bolt pattern width
4.0000 in, 101.6 mm
Nominal ratio
20
Output
Hollow bore
Output bore/shaft diameter
1.9375 in
Output horse power
5.03
Output shaft
Hollow
Output shaft center to input motor mounting face distance
10.2600 in, 260.604 mm
Output style
Hollow
Output Style
Hollow bore output, 1.9375" diameter
Overhung load
2760 lbf, 12277.092 N
Paint type
Standard
Paint/coating
Green
Performance
5.79 HP input rating, 3, 620 in-lb output torque
Product Type
TIGEAR-2 right-angle worm gear speed reducer
Rated torque output
3620 in/lb, 3620.0 in/lb
Ratio
20:1 reduction ratio
Seal type
Single-lip contact
Suitable for washdown
No
Thermal horsepower rating
5.9700 hp, 4.452 kW
Specifications
- Catalog Number: 35A20H14
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 20:1
- Output Style: Hollow Bore
- Output Shaft Diameter: 1.9375"
- Input Style: 3-Piece Coupled
- Frame: 140TC
- Center Distance: 3.5"
- Case Size: 35
- Housing Material: Cast Iron
- Paint: Green
- Weight: 115.0000 lb
SKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreHow should I store a Dodge gearbox over the off-season? This product
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails? This product
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands? This product
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
SKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/