We never sell your data to third parties
Dodge 30AZ07L14 TIGEAR-2 E-Z Kleen worm gear speed reducer with 7:1 ratio, 3-piece coupled input, left solid output shaft, 140TC frame, and 3" center distance. Cast iron housing with green paint, rated 8.74 HP input and 8.15 HP output, 1.375" output shaft diameter. Silver-gray epoxy finish for corrosion resistance in washdown environments.
MODEL 30AZ07L14
Contact supplier for technical support on: +1-864-284-5700
$2,785.46 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Base to output center height
3.2500 in, 82.55 mm
Capacity
8.74 HP input, 2171 in-lb output torque
Case size
30
Center Distance
3" (size 30 case)
Center distance (in)
3 in, Center distance (in):3.0000 in, 76.2 mm
Center to end of shaft distance
6.7500 in, 171.45 mm
Finish
Silver-gray epoxy
Frame
140TC NEMA motor flange compatibility
Gear Type
Worm gear
Gearbox component type
Gearbox
Horsepower rating input
8.7400 hp, 6.517 kW
Horsepower rating output
8.1500 hp, 6.077 kW
Housing
Cast iron
Housing material
Cast iron
Input
3-piece coupled
Input flange
140TC
Input HP
8.74
Input style
3-Piece coupled
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 140TC frame
Mounting bolt pattern length
7.0000 in, 177.8 mm
Mounting bolt pattern width
4.0000 in, 101.6 mm
Nominal ratio
7
Output
Left side solid output shaft, 1.3750" diameter
Output bore/shaft diameter
1.375 in
Output horse power
8.15
Output shaft
Left (solid A)
Output shaft center to input motor mounting face distance
9.2300 in, 234.442 mm
Output style
Left
Overhung load
1540 lbf, 6850.261 N
Paint type
Stainless epoxy
Paint/coating
Green
Rated torque output
2171 in/lb, 2171.0 in/lb
Ratio
7:1 speed reduction
Seal type
Two-piece harsh duty
Shaft diameter output
1.3750 in, 34.925 mm
Shaft length output
3.2000 in, 81.28 mm
Suitable for washdown
Yes
Thermal horsepower rating
9.6400 hp, 7.189 kW
Specifications
- Catalog Number: 30AZ07L14
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 7:1
- Output Style: Left Side Solid Output Shaft
- Output Shaft Diameter: 1.375"
- Input Style: 3-Piece Coupled
- Frame: 140TC
- Center Distance: 3"
- Case Size: 30
- Housing Material: Cast Iron
- Paint: Green
- Weight: 95.0000 lb
How should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
#152276
Brand
Dodge
Model
30AZ40R56
#145476
Brand
Dodge
Model
30AZ20LR56
#145160
Brand
Dodge
Model
30AZ07R14
#152284
Brand
Dodge
Model
30AZ07L14
#145131
Brand
Dodge
Model
30AZ50LR56
#5999520
Brand
Winsmith
Model
M3008SL14
| Brand | Alvord-Polk Tool |
| Model | 650-F 1.2500 |
| Brand | Fenner Industrial Motion |
| Model | B602607 |
| Brand | Red Lion Controls |
| Model | ZOH1500A |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-243133 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/