We never sell your data to third parties
Dodge 30QZ50R14 TIGEAR-2 E-Z Kleen worm gear speed reducer, 50:1 ratio, quill input, right solid output shaft, 140TC frame, 3" center distance. Cast iron housing, food-grade white paint, 1.75 HP, 2257 in-lb torque. - Ratio: 50:1
- Center Distance: 3"
- Input: 140TC Flange
- Output Bore/Shaft Diameter: 1.375"
- Output: Right Side Solid Output Shaft
- Paint/Coating: Green
- Housing Material: Cast Iron
- Housing Material: Cast Iron
- Input Horse Power: 1.75
- Output Horse Power: 1.25
MODEL 30QZ50R14
Contact supplier for technical support on: +1-864-284-5700
$2,374.51 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Base to output center height
3.2500 in, 82.55 mm
Case size
30
Center distance (in)
3 in, Center distance (in):3.0000 in, 76.2 mm
Center to end of shaft distance
6.7500 in, 171.45 mm
Finish
Silver-gray epoxy
Gearbox component type
Gearbox
Horsepower rating input
1.7500 hp, 1.305 kW
Horsepower rating output
1.2500 hp, 0.932 kW
Housing material
Cast iron
Input
140TC flange
Input flange
140TC
Input HP
1.75
Input style
Quill
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 140TC frame
Mounting bolt pattern length
7.0000 in, 177.8 mm
Mounting bolt pattern width
4.0000 in, 101.6 mm
Nominal ratio
50
Output
Right side solid output shaft
Output bore/shaft diameter
1.375 in
Output horse power
1.25
Output shaft
Right (solid B)
Output shaft center to input motor mounting face distance
6.1100 in, 155.194 mm
Output style
Right
Overhung load
2300 lbf, 10230.91 N
Paint type
Stainless epoxy
Paint/coating
Green
Rated torque output
2257 in/lb, 2257.0 in/lb
Ratio
50 to 1
Seal type
Two-piece harsh duty
Shaft diameter output
1.3750 in, 34.925 mm
Shaft length output
3.2000 in, 81.28 mm
Suitable for washdown
Yes
Thermal horsepower rating
2.3400 hp, 1.745 kW
- Ratio: 50:1 reduction
- Center Distance: 3" (30 case size)
- Output: Right side solid shaft, 1.3750" diameter (34.925 mm)
- Input: Quill type for compact mounting
- Frame: 140TC NEMA flange
- Power Rating: 1.75 HP input
- Torque: 2,257 in-lb output
- Housing: Cast iron construction
- E-Z Kleen: Food-grade white paint for washdown environments
- Design: Single-worm, maintenance-free, factory filled with synthetic lubricant
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read more
#145144
Brand
Dodge
Model
30QZ07R18
#142696
Brand
Dodge
Model
30BASE
#152518
Brand
Dodge
Model
30QZ40H56
#149496
Brand
Dodge
Model
30Q05R14
#149725
Brand
Dodge
Model
30QZ40LR14
#152277
Brand
Dodge
Model
30AZ50R14
#144645
Brand
Dodge
Model
30AZ50R14WP
#144688
Brand
Dodge
Model
30QZ50R14WP
#5999733
Brand
Winsmith
Model
M3050SR14
| Brand | MROSupply Fasteners |
| Model | FSTPCK-830518 |
| Brand | PEER Bearing |
| Model | FHSPPZ207-22-IL |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-458676 |
| Brand | Rexnord |
| Model | 701-00006-032 |
| Brand | Dichtomatik |
| Model | 90X110X13SC |
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/