We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 35A30L14WP TIGEAR-2 worm gear speed reducer, 30:1 ratio, 3-piece coupled input, left solid output shaft 1.5" diameter, 140TC C-face frame, 3.5" center distance, 4.15 HP, 3682 in-lb torque, white paint finish. - Ratio: 30:1
- Center Distance: 3.5"
- Input: 140TC Flange
- Output Bore/Shaft Diameter: 1.5"
- Output: Left Side Solid Output Shaft
- Paint/Coating: White
- Housing Material: Cast Iron
- Housing Material: Cast Iron
- Input Horse Power: 4.15
- Output Horse Power: 3.41
MODEL 35A30L14WP
Contact supplier for technical support on: +1-864-284-5700
$2,539.58 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Base to output center height
3.9900 in, 101.346 mm
Case size
35
Center distance (in)
3.5 in, Center distance (in):3.5000 in, 88.9 mm
Center to end of shaft distance
7.0600 in, 179.324 mm
Finish
White epoxy
Gearbox component type
Gearbox
Horsepower rating input
4.1500 hp, 3.095 kW
Horsepower rating output
3.4100 hp, 2.543 kW
Housing material
Cast iron
Input
140TC flange
Input flange
140TC
Input HP
4.15
Input style
3-Piece coupled
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 140TC frame
Mounting bolt pattern length
7.5000 in, 190.5 mm
Mounting bolt pattern width
4.0000 in, 101.6 mm
Nominal ratio
30
Output
Left side solid output shaft
Output bore/shaft diameter
1.5 in
Output horse power
3.41
Output shaft center to input motor mounting face distance
10.2600 in, 260.604 mm
Output style
Left
Overhung load
2760 lbf, 12277.092 N
Paint type
White epoxy
Paint/coating
White
Rated torque output
3682 in/lb, 3682.0 in/lb
Ratio
30 to 1
Seal type
Single-lip contact
Shaft diameter output
1.5000 in, 38.1 mm
Shaft length output
3.5100 in, 89.154 mm
Suitable for washdown
No
Thermal horsepower rating
4.4300 hp, 3.303 kW
- Reducer Type: TIGEAR-2 right angle worm gear
- Gear Ratio: 30:1 reduction ratio
- Input Configuration: 3-piece coupled input with 140TC C-face frame
- Output Shaft: Left side solid shaft, 1.5" diameter
- Center Distance: 3.5" case size 35
- Power Rating: 4.15 HP input capacity
- Torque Output: 3682 in-lb maximum torque
- Housing Material: Cast iron construction
- Finish: White paint for food/pharmaceutical/washdown environments
- Applications: Conveyors, mixers, agitators, packaging equipment requiring right angle drive
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read more
#143629
Brand
Dodge
Model
35A40LR56WP
#143624
Brand
Dodge
Model
35A30R18WP
#143618
Brand
Dodge
Model
35A10R14WP
#143632
Brand
Dodge
Model
35A50L14WP
#143626
Brand
Dodge
Model
35A40L56WP
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/