We never sell your data to third parties
Dodge SS20A30L56 stainless steel TIGEAR-2 worm gear speed reducer with 30:1 ratio, 3-piece coupled input, left side solid output shaft, 56C frame, 2" center distance. Corrosion resistant housing for washdown applications. - Ratio: 30:1
- Center Distance: 2"
- Input: 56C Flange
- Output Bore/Shaft Diameter: 1"
- Output: Left Side Solid Output Shaft
- Paint/Coating: No
- Housing Material: Stainless Steel
- Housing Material: Stainless Steel
- Input Horse Power: 0.96
- Output Horse Power: 0.74
MODEL SS20A30L56
Contact supplier for technical support on: +1-864-284-5700
$2,098.43 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Base to output center height
2.2400 in, 56.896 mm
Case size
20
Center distance (in)
2 in, Center distance (in):2.0000 in, 50.8 mm
Center to end of shaft distance
4.6900 in, 119.126 mm
Gearbox component type
Gearbox
Horsepower rating input
0.9600 hp, 0.716 kW
Horsepower rating output
0.7400 hp, 0.552 kW
Housing material
Stainless steel
Input
56C flange
Input HP
0.96
Input style
3-Piece coupled
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 56C frame
Mounting bolt pattern length
5.0000 in, 127.0 mm
Mounting bolt pattern width
2.8800 in, 73.152 mm
Nominal ratio
30
Output
Left side solid output shaft
Output bore/shaft diameter
1 in
Output horse power
0.74
Output shaft center to input motor mounting face distance
7.8500 in, 199.39 mm
Output style
Left
Overhung load
1560 lbf, 6939.226 N
Paint/coating
No
Rated torque output
802 in/lb, 802.0 in/lb
Ratio
30 to 1
Seal type
Two-piece harsh duty
Shaft diameter output
1.0000 in, 25.4 mm
Shaft length output
2.1100 in, 53.594 mm
Suitable for washdown
Yes
Thermal horsepower rating
1.4900 hp, 1.111 kW
- Gear Type: Right-angle worm gear with 30:1 reduction ratio
- Housing Material: Stainless steel for corrosion resistance and washdown applications
- Input Configuration: 3-piece coupled input allows easy motor separation
- Output: Left side solid shaft, 1.0" diameter
- Motor Frame: 56C flange mounting
- Center Distance: 2" compact worm gear design
- Power Rating: 0.96 HP input capacity
- Output Torque: 802 in-lb maximum
- Applications: Food processing, pharmaceutical, chemical washdown environments requiring stainless construction
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read more
#2248450
Brand
Dodge
Model
SS20Q50R56
#2248374
Brand
Dodge
Model
SS20Q10L14
#2248379
Brand
Dodge
Model
SS20Q10R56
#2248410
Brand
Dodge
Model
SS20Q18L14
#2248405
Brand
Dodge
Model
SS20Q15R56
| Brand | Gates Rubber |
| Model | XH-600-200-LLUSNT |
| Brand | Siemens Controls |
| Model | 5SJ4113-7HG41 |
| Brand | Thomson Linear |
| Model | QSCP 1 1/2 L 48 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-830372 |
| Brand | Hydraulic Technologies |
| Model | CPSC556CP15902MD |
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/