We never sell your data to third parties
Dodge SS23Q50R56 23Q50R56 stainless steel TIGEAR-2 worm gear reducer with 50:1 ratio, quill input, right side solid output shaft 1.25" diameter, 56C flange input, and 2.3" center distance. 0.95 HP input, 0.66 HP output. Maintenance-free sealed design with cast stainless steel housing for corrosion resistance in washdown environments.
MODEL SS23Q50R56
Contact supplier for technical support on: +1-864-284-5700
$2,222.18 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
#142685
Brand
Dodge
Model
23SBASE
#2248715
Brand
Dodge
Model
SS23Q60L56
#2248697
Brand
Dodge
Model
SS23Q30R56
#2248704
Brand
Dodge
Model
SS23Q40LR14
Base to output center height
2.5000 in, 63.5 mm
Capacity
0.95 HP input, 1182 in-lb output torque
Case size
23
Center Distance
2.3" compact case size
Center distance (in)
2.3 in, Center distance (in):2.3100 in, 58.674 mm
Center to end of shaft distance
5.1400 in, 130.556 mm
Frame
56C motor flange compatibility
Gear Type
TIGEAR-2 worm gear
Gearbox component type
Gearbox
Horsepower rating input
0.9500 hp, 0.708 kW
Horsepower rating output
0.6600 hp, 0.492 kW
Housing
Stainless steel
Housing material
Stainless steel
Input
Quill input
Input HP
0.95
Input style
Quill
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 56C frame
Mounting bolt pattern length
0.8800 in, 22.352 mm
Mounting bolt pattern width
5.0000 in, 127.0 mm
Nominal ratio
50
Output
Right solid shaft 1.1250" diameter
Output bore/shaft diameter
1.25 in
Output horse power
0.66
Output shaft center to input motor mounting face distance
5.4700 in, 138.938 mm
Output style
Right
Overhung load
1610 lbf, 7161.637 N
Paint/coating
No
Rated torque output
1182 in/lb, 1182.0 in/lb
Ratio
50:1 reduction ratio
Seal type
Two-piece harsh duty
Shaft diameter output
1.1250 in, 28.575 mm
Shaft length output
2.1800 in, 55.372 mm
Suitable for washdown
Yes
Thermal horsepower rating
1.4200 hp, 1.059 kW
Specifications
- Catalog Number: SS23Q50R56
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 50:1
- Output Style: Right Side Solid Output Shaft
- Output Shaft Diameter: 1.25"
- Input Style: Quill
- Frame: 56C
- Center Distance: 2.3"
- Case Size: 23
- Housing Material: Stainless Steel
- Paint: Green
- Weight: 50.0000 lb
SKU: 5005293
Dodge conveyor bushings
The right part, in stock, easy to find, quickly shipped.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreHow should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
| Brand | Allen Bradley |
| Model | 871C-P15B30 |
SKU: 5005293
Dodge conveyor bushings
The right part, in stock, easy to find, quickly shipped.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/