We never sell your data to third parties
Dodge SS26Q12R56 stainless steel TIGEAR-2 worm gear reducer with 12:1 ratio, 2.6" center distance, quill input, right side solid output shaft (1.25" diameter), and 56C flange mount. 4.08 HP input, 3.63 HP output. Cast stainless steel housing for corrosion resistance in washdown environments. Factory filled with synthetic lubricant, ventless and maintenance-free.
MODEL SS26Q12R56
Contact supplier for technical support on: +1-864-284-5700
$2,570.04 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
#2248872
Brand
Dodge
Model
SS26Q12L56
#2248903
Brand
Dodge
Model
SS26Q20LR14
#2248876
Brand
Dodge
Model
SS26Q12R56
#5011587
Brand
Dodge
Model
SS26A05R18
Base to output center height
2.8700 in, 72.898 mm
Capacity
4.08 HP input, 1654 in-lb output torque
Case size
26
Center Distance
2.6" (case size 26)
Center distance (in)
2.6 in, Center distance (in):2.6300 in, 66.802 mm
Center to end of shaft distance
5.6300 in, 143.002 mm
Gear Type
TIGEAR-2 worm gear
Gearbox component type
Gearbox
Horsepower rating input
4.0800 hp, 3.042 kW
Horsepower rating output
3.6300 hp, 2.707 kW
Housing
Stainless steel
Housing material
Stainless steel
Input
Quill input shaft
Input HP
4.08
Input style
Quill
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 56C frame
Mounting
56C NEMA C-face flange
Mounting bolt pattern length
0.3800 in, 9.652 mm
Mounting bolt pattern width
6.3800 in, 162.052 mm
Nominal ratio
12
Output
Right side solid output shaft, 1.125" diameter
Output bore/shaft diameter
1.25 in
Output horse power
3.63
Output shaft center to input motor mounting face distance
5.5100 in, 139.954 mm
Output style
Right
Overhung load
1610 lbf, 7161.637 N
Paint/coating
No
Rated torque output
1654 in/lb, 1654.0 in/lb
Ratio
12:1 reduction
Seal type
Two-piece harsh duty
Shaft diameter output
1.1250 in, 28.575 mm
Shaft length output
2.6700 in, 67.818 mm
Suitable for washdown
Yes
Thermal horsepower rating
4.7200 hp, 3.52 kW
Specifications
- Catalog Number: SS26Q12R56
- Product Line: Dodge TIGEAR-2
- Gear Type: Worm Gear
- Ratio: 12:1
- Output Style: Right Side Solid Output Shaft
- Output Shaft Diameter: 1.25"
- Input Style: Quill
- Frame: 56C
- Center Distance: 2.6"
- Case Size: 26
- Housing Material: Stainless Steel
- Paint: Green
- Weight: 65.0000 lb
SKU: 791479
Great customer service
ITEMS WERE IN STOCK, QUICK DELIVERY AND GREAT CUSTOMER SERVICE.
Read moreHow should I store a Dodge gearbox over the off-season?
Dodge's guidance for seasonal or long-term storage: fill the unit completely full of oil, plug the breather, and coat the seal surfaces with cosmoline or grease. Restore the correct operating oil level and breather before returning the unit to service.
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
Why do Dodge gearboxes cost more than import brands?
Reliability is the product. Dodge TXT and Torque-Arm II reducers go through 15 quality checks before shipping, and Dodge manufactures its own bearings at its North Carolina roller-bearing and Tennessee ball-bearing plants rather than buying them in. You're paying for uptime.
| Brand | INA Bearing |
| Model | RWCT17 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-560240 |
| Brand | Gates Rubber |
| Model | 8MX-25S-12 |
SKU: 791479
Great customer service
ITEMS WERE IN STOCK, QUICK DELIVERY AND GREAT CUSTOMER SERVICE.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/