We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Morse Raider Plus 206Q56L25 2.06-inch center distance worm gear reducer featuring a C-Face Quill Input and 25:1 reduction ratio. This single-reduction unit delivers reliable right-angle power transmission for industrial applications. Alternative catalog number XE1096.
MODEL XE1096
Contact supplier for technical support on: 800-626-2120
$1,219.05 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Center Distance (in)
2.06
Center Distance Range
1" thru 3.25"
Efficiency
80
Frame Size
56C
Gear Ratio
25:1
Gear Type
Worm
Housing Material
Cast Iron
HP Range
1 to 1-1/2 (< 2)
Input Bore (C Face)
0.625
Input Diameter (in)
0.625
Input HP @ 1750 RPM
1.33
Input Keyway (C Face)
3/16x3/32
Input Speed
1750
Input Style
C-Face Quill
Mounting Type
No Base
No. of Gear Reductions
Single
Output Diameter (in)
1
Output Shaft Direction
Left
Output Torque Range
500 to 1000 in lbs
Output Torque Rating (in-lb)
985 in-lbs @1750 input RPM
Output Type
Shaft
Overhung Load Rating (Output Shaft(lb))
1210
Product Type
Worm Speed Reducer
Ratio Range
25:1
Reducer Style
Standard
Series Code
Raider
Service Factor
1
Thrust Rating - output shaft
1144
| Reducer Style | Standard |
|---|---|
| Center Distance (In) | 2.06 |
| Input Shaft Style | (Q) C Face Quilled |
| Motor Frame Size | 56C |
| Output Shaft Style | (L) Left Hand Output |
| Ratio | 25: 1 |
| Parts List | Form 9136 |
| Sale Qty Multiple: | 1 |
|---|---|
| Packaged Length: | 9.25 |
| Packaged Width: | 9.25 |
| Packaged Height: | 8.75 |
| No. Links/Ft. : | 0 |
| Reducer Style: | Standard |
| Center Distance (In): | 2.06 |
| Input Shaft Style: | (Q) C Face Quilled |
| Motor Frame Size: | 56C |
| Output Shaft Style: | (L) Left Hand Output |
| Ratio: | 25: 1 |
| Parts List: | Form 9136 |
| Housing Material: | Cast Iron |
| Gear Drive Reductions: | Single |
| Nominal Output RPM @1750: | 70.0 |
| Mechanical Input HP Rating @ 1750: | 0.99 |
| Mechanical Output Torque Rating @ 1750 Input: | 706 |
| Thermal Input HP Rating @ 1750 Input: | 0.92 |
| Thermal Output Torque Rating @ 1750 Input: | 662 |
| Max OHL (Output Shaft): | 1, 078 |
| Max Thrust Load (Output Shaft): | 2143 |
| Shaft Seal Material: | Nitrile |
| Typical Applications: | |
| Feature 1: | Rugged Cast-Iron Housing: Provides maximum strength and dependability. |
| Feature 2: | Integral Worm and Shaft: Induction hardened to 58RC for extra strength. |
| Feature 3: | Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft. |
| Feature 4: | Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear Resistance. |
| Std Package Quantity: | 1 |
| Std Mfg Delivery: | Normally Stocked |
Accessories
| Adjustable Torque Arm Kit | 206-375ATAK |
| Econo Base Kit | 206E-BK |
| Solid Base Kit | 206-BKS |
| Standard Base Kit | 206S-BK |
| Tack on Adapter/C Face Output Flange Kit | 133TAD Q56 |
| Torque Arm Kit | 206H-TAK |
| Vertical "J" Base Kit | 206VJ-BK |
| Vertical High Base Kit | 206VH-BK |
| Vertical Low Base Kit | 206VL-BK |
Dimensions
| Part No | XE1096 |
|---|---|
| Description | 206Q56L25 |
| C. D. | 2.06 |
| A | 5.50 |
| B | 3.75 |
| C | 5.00 |
| D | 2.88 |
| E | 2.50 |
| F | 1.44 |
| H | 2.28 |
| J | 4.75 |
| K | 6.38 |
| L | 3.00 |
| M | 7.25 |
| N | 4.69 |
| P | 4.34 |
| R | 3.25 |
| Size (T) | 3/8-16 |
| Deep (T) | 0.61 |
| Output Shaft (U) | 1.000 |
| V | 2.00 |
| Key Sq. (W) | 0.250 |
| Key Length (W) | 1.75 |
| Input Bore | 0.625 |
| Input Keyway | 3/16x3/32 |
| Brand | Jason Industrial |
| Model | 3VX710 |
