We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Morse 237Q140L40 XF1128 40:1 Ratio 2.38" Center Distance 0.875" Input Bore (C Face) 0.875" Input Diameter C-Face Quill Input 1.125" Output Diameter Shaft Output Cast Iron Single-Reduction Worm Reducer 40:1 Ratio, 2.38" Center Distance, 0.875" Input Bore (C Face), 0.875" Input Diameter, C-Face Quill Input, 1.125" Output Diameter, Shaft Output, Cast Iron Single-Reduction Worm Reducer
MODEL XF1128
Contact supplier for technical support on: 800-626-2120
$1,359.09 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Center Distance Range
1" thru 3.25"
Centre Distance
2.38 in
Efficiency
80 %
Gear Ratio
40:1
Gear Type
Worm
HP
1.342 Input
HP Range
1 to 1-1/2 (< 2)
Input Bore (C Face)
0.875
Input HP @ 1750 RPM
1.342
Input Keyway (C Face)
3/16x3/32
Input Maximum Speed
1750 rpm
Input Size
7/8 in Dia
Input Type
C-Face Quill
Keyway Size
3/16 x 3/32 in Input
Material
Cast Iron
Mounting Type
No Base
No. of Gear Reductions
Single
Output Diameter (in)
1.125
Output Maximum Speed
29.1 rpm
Output Shaft Direction
Left
Output Size
1.125 in Dia x 2.37 in L
Output Torque Range
1000 to 2500 in lbs
Output Type
Shaft
Overhung Load Rating (Output Shaft(lb))
1770
Product Type
Worm Speed Reducer
Reducer Style
Standard
Series Code
Raider
Service Factor
1
Thrust Rating - output shaft
2091
Type
Standard Single Reduction
Regal Beloit Morse 237Q140L40
UPC: 662460582788 | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Morse Raider Plus Worm Gear Reducer, Standard Single Reduction, 40:1 Gear Ratio, 1.342 hp Input, C-Face Quill Input, Shaft Output, 7/8 in Dia Input, 1.125 in Dia x 2.37 in L Output, 29.1 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 2.38 in Centre Distance, 3/16 x 3/32 in Input Keyway, 80 % Efficiency, No Base Mount, Cast Iron
Features:
- Rugged cast iron housing provides maximum strength and dependability
- High lead angle worm is case hardened, ground and polished
- Large, single row ball bearings on input shaft - absorb radial and thrust loads at higher input speeds
- Tapered roller bearings are used on output shaft
- Forged bronze worm gears - provide optimum balance of strength and wear
Packaging:
Limited
| Brand | Timken Belts |
| Model | R5V630-3 |
| Brand | JW Winco |
| Model | 451-30-15-M8-SS-55 |
| Brand | HKK Chain |
| Model | RC060RK1E2R |
| Brand | Allen Bradley |
| Model | 150-B97NBD |
| Brand | SKF Bearing |
| Model | RKS.23 0841 |
| Brand | Timken |
| Model | M252349DW-902D3 |