We never sell your data to third parties
Morse Raider Plus 175Q56H10 014 1.75-inch center distance worm gear reducer with C-Face quill input, 10:1 ratio, and hollow bore output. This single-reduction unit provides reliable right-angle power transmission for industrial applications. Alternate catalog number XD1233.
MODEL XD1233
Contact supplier for technical support on: 800-626-2120
$1,340.95 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Center Distance Range
1" thru 3.25"
Centre Distance
1-3/4 in
Efficiency
80 %
Frame Size
56C
Gear Ratio
10:1
Gear Type
Worm
Height
5.75 in
HP
1
HP Range
1 to 1-1/2 (< 2)
Input Bore (C Face)
0.625
Input HP @ 1750 RPM
1.625
Input Keyway (C Face)
3/16x3/32
Input Maximum Speed
1750 rpm
Input Size
5/8 in Dia
Input Torque
58.52 in-Lbs @1750 input rpm, 1 HP
Input Type
C-Face Quilled
Keyway Size
3/16 x 3/32 in Input/1/4 x 1/8 in Output
Length
7.33 in
Lubrication Type
Polyglycol Oil
Material
Cast Iron
Mounting Type
Direct/Floor
No. of Gear Reductions
Single
Output Diameter (in)
0.875
Output Maximum Speed
175 rpm
Output Size
7/8 in ID
Output Torque Range
500 to 1000 in lbs
Output Torque Rating (in-lb)
175 in-Lbs @1750 input rpm, 1 HP
Output Type
Hollow
Overhung Load Rating (Output Shaft(lb))
1200
Product Type
Worm Speed Reducer
Reducer Style
Standard
Thrust Rating - output shaft
976
Torque Rating
58.52 in-lb Input/175 in-lb Output
Type
Single Reduction Standard
Width
5.5 in
Regal Beloit Morse 175Q56H10 014
UPC: 662288996460 | UNSPSC: 25173800 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Morse Raider Plus Worm Gear Reducer, Single Reduction Standard, 10:1 Gear Ratio, 1 hp, C-Face Quilled Input, Hollow Output, 5/8 in Dia Input, 7/8 in ID Output, 175 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 58.52 in-lb Input/175 in-lb Output, 1-3/4 in Centre Distance, 3/16 x 3/32 in Input/1/4 x 1/8 in Output Keyway, 80 % Efficiency, Polyglycol Oil Lubrication, Direct/Floor Mount, Cast Iron, 7.33 in L x 5.5 in W x 5.75 in H
Features:
- Rugged cast iron housing provides maximum strength and dependability
- High lead angle worm is case hardened, ground and polished
- Large, single row ball bearings on input shaft to absorb radial and thrust loads at higher input speeds
- Tapered roller bearings are used on output shaft
- Forged bronze worm gears provide optimum balance of strength and wear
- Heavy duty tapered roller bearings on all output shafts
- 56C motor frame size
Certifications/Standards:
FDA Approved
1 Year
| Brand | AMI Bearings |
| Model | UCFB207-21NPMZ2 |