We never sell your data to third parties
Morse Raider Plus 262Q56H60 102 2.62-inch center distance worm gear reducer with C-Face quill input, 60:1 reduction ratio, and hollow bore output. This single-reduction unit provides right-angle power transmission for industrial applications. Alternate catalog number XG1335.
MODEL XG1335
Contact supplier for technical support on: 800-626-2120
$2,324.44 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Center Distance Range
1" thru 3.25"
Centre Distance
2.62 in
Efficiency
80 %
Frame Size
56C
Gear Ratio
60:1
Gear Type
Worm
Height
8 in
HP
1
HP Range
1 to 1-1/2 (< 2)
Input Bore (C Face)
0.63
Input HP @ 1750 RPM
1.216
Input Keyway (C Face)
3/16x3/32
Input Maximum Speed
1750 rpm
Input Size
0.63 in Dia
Input Type
C-Face Quilled
Keyway Size
3/16 x 3/32 in Input/3/8 x 3 in Output
Length
9.53 in
Lubrication Type
Polyglycol Oil
Material
Cast Iron
Mounting Type
Direct/Floor
No. of Gear Reductions
Single
Output Diameter (in)
1.125
Output Maximum Speed
29.1 rpm
Output Size
1-1/8 in ID
Output Torque Range
1000 to 2500 in lbs
Output Torque Rating (in-lb)
1805 in-lbs @1750 input RPM
Output Type
Hollow
Overhung Load Rating (Output Shaft(lb))
1625
Product Type
Worm Speed Reducer
Reducer Style
Standard
Thrust Rating - output shaft
2091
Torque Rating
43.79 in-lb Input/29.1 in-lb Output
Type
Single Reduction Standard
Width
7 in
Regal Beloit Morse 262Q56H60 102
UPC: 662288000068 | UNSPSC: 25173800 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Morse® Raider® Plus Worm Gear Reducer, Single Reduction Standard, 60:1 Gear Ratio, 1 hp, C-Face Quilled Input, Hollow Output, 0.63 in Dia Input, 1-1/8 in ID Output, 29.1 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 43.79 in-lb Input/29.1 in-lb Output, 2.62 in Centre Distance, 3/16 x 3/32 in Input/3/8 x 3 in Output Keyway, 80 % Efficiency, Polyglycol Oil Lubrication, Direct/Floor Mount, Cast Iron, 9.53 in L x 7 in W x 8 in H
Features:
- Rugged cast iron housing provides maximum strength and dependability
- High lead angle worm is case hardened, ground and polished
- Large, single row ball bearings on input shaft to absorb radial and thrust loads at higher input speeds
- Tapered roller bearings are used on output shaft
- Forged bronze worm gears provide optimum balance of strength and wear
- Heavy duty tapered roller bearings on all output shafts
- 56C motor frame size
Certifications/Standards:
FDA Approved
Warranty:
1 Year
