We never sell your data to third parties
Morse Raider Plus 300Q140H20 107 3.00-inch center distance worm gear reducer with C-Face quill input, 20:1 ratio, and hollow bore output. This single-reduction unit provides right-angle power transmission for industrial applications. Alternative catalog number XH1356.
MODEL XH1356
Contact supplier for technical support on: 800-626-2120
$2,510.16 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Center Distance Range
1" thru 3.25"
Centre Distance
3 in
Efficiency
80
Frame Size
140TC
Gear Ratio
20:1
Gear Type
Worm
HP
1
HP Range
3HP (< 5)
Input Bore (C Face)
0.875
Input HP @ 1750 RPM
3.95
Input Keyway (C Face)
3/16x3/32
Input Maximum Speed
1750 rpm
Input Size
7/8 in Dia
Input Torque
142.26 in-Lbs @1750 input rpm, 1 HP
Input Type
C-Face Quilled
Keyway Size
3/16 x 3/32 in Input/1/2 x 3 in Output
Length
10.79 in
Lubrication Type
Polyglycol Oil
Material
Cast Iron
No. of Gear Reductions
Single
Output Diameter (in)
1.438
Output Maximum Speed
87.5 rpm
Output Size
1.438 in Dia
Output Torque Range
1000 to 2500 in lbs
Output Torque Rating (in-lb)
87.5 in-Lbs @1750 input rpm, 1 HP
Output Type
Hollow
Overhung Load Rating (Output Shaft(lb))
2574
Product Type
Worm Speed Reducer
Reducer Style
Standard
Thrust Rating - output shaft
2574
Torque Rating
142.26 in-lb Input/87.5 in-lb Output
Type
Single Reduction Standard
Width
7.5 in
Regal Beloit Morse 300Q140H20 107
UPC: 662460637563 | UNSPSC: 25173800 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Morse® Raider® Plus Worm Gear Reducer, Single Reduction Standard, 20:1 Gear Ratio, 1 hp, C-Face Quilled Input, Hollow Output, 7/8 in Dia Input, 1.438 in Dia Output, 87.5 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 142.26 in-lb Input/87.5 in-lb Output, 3 in Centre Distance, 3/16 x 3/32 in Input/1/2 x 3 in Output Keyway, Polyglycol Oil Lubrication, Cast Iron, 10.79 in L x 7.5 in W
Features:
- Rugged cast iron housing provides maximum strength and dependability
- High lead angle worm is case hardened, ground and polished
- Large, single row ball bearings on input shaft to absorb radial and thrust loads at higher input speeds
- Tapered roller bearings are used on output shaft
- Forged bronze worm gears provide optimum balance of strength and wear
- Modular worm gear design provides over 10 million configurations from stock components
- Double sealing capability on input and output shafts
- Dimensionally interchangeable with major industry competitors
- 1-7/16 in bore hollow output
Certifications/Standards:
FDA Approved
Warranty:
1 year
