We never sell your data to third parties
Morse Raider Plus 154Q56H10 010 1.54-inch center distance worm gear reducer with C-Face quill input and 10:1 reduction ratio. This single-reduction unit features a hollow bore output for right-angle power transmission in industrial applications. Alternative catalog number XC1162.
MODEL XC1162
Contact supplier for technical support on: 800-626-2120
$1,332.72 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Center Distance Range
1" thru 3.25"
Centre Distance
1.54 in
Efficiency
80 %
Frame Size
56C
Gear Ratio
10:1
Gear Type
Worm
Height
5.38 in
HP
1
HP Range
1 to 1-1/2 (< 2)
Input Bore (C Face)
0.625
Input HP @ 1750 RPM
1.279
Input Keyway (C Face)
3/16 x 3/32
Input Maximum Speed
1750 rpm
Input Size
5/8 in Dia
Input Type
C-Face Quilled
Keyway Size
3/16 x 3/32 in Input/3/16 x 1-1/2 in Output
Length
7.13 in
Lubrication Type
Polyglycol Oil
Material
Cast Iron
Mounting Type
Direct/Floor
No. of Gear Reductions
Single
Output Diameter (in)
0.625
Output Maximum Speed
175 rpm
Output Shaft Direction
L or R
Output Size
5/8 in ID
Output Torque Range
250 to 500 in lbs
Output Torque Rating (in-lb)
402 in-lbs @1750 input RPM
Output Type
Hollow
Overhung Load Rating (Output Shaft(lb))
860
Product Type
Worm Speed Reducer
Reducer Style
Standard
Series Code
Raider
Service Factor
1
Thrust Rating - output shaft
1056
Torque Rating
46.06 in-lb Input/175 in-lb Output
Type
Single Reduction Standard
Width
4.82 in
Regal Beloit Morse 154Q56H10 010
UPC: 662288340812 | UNSPSC: 25173800 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Morse Raider Plus Worm Gear Reducer, Single Reduction Standard, 10:1 Gear Ratio, 1 hp, C-Face Quilled Input, Hollow Output, 5/8 in Dia Input, 5/8 in ID Output, 175 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 46.06 in-lb Input/175 in-lb Output, 1.54 in Centre Distance, 3/16 x 3/32 in Input/3/16 x 1-1/2 in Output Keyway, 80 % Efficiency, Polyglycol Oil Lubrication, Direct/Floor Mount, Cast Iron, 7.13 in L x 4.82 in W x 5.38 in H
Features:
- Rugged cast iron housing provides maximum strength and dependability
- High lead angle worm is case hardened, ground and polished
- Large, single row ball bearings on input shaft to absorb radial and thrust loads at higher input speeds
- Tapered roller bearings are used on output shaft
- Forged bronze worm gears provide optimum balance of strength and wear
- Heavy duty tapered roller bearings on all output shafts
- 56C motor frame size
Certifications/Standards:
FDA Approved
1 Year
| Brand | Boston Gear |
| Model | 30213731 |
| Brand | Jason Industrial |
| Model | 540L075US |
