We never sell your data to third parties
Morse Raider Plus 206Q140H20 107 worm gear reducer with 2.06-inch center distance, C-Face quill input, 20:1 ratio, and hollow bore output. Single-reduction right-angle power transmission for industrial applications. Alternate catalog number XE1175.
MODEL XE1175
Contact supplier for technical support on: 800-626-2120
$1,572.71 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Center Distance Range
1" thru 3.25"
Centre Distance
2.06 in
Efficiency
80 %
Frame Size
140TC
Gear Ratio
20:1
Gear Type
Worm
Height
6.94 in
HP
1
HP Range
1 to 1-1/2 (< 2)
Input Bore (C Face)
0.875
Input HP @ 1750 RPM
1.58
Input Keyway (C Face)
3/16 x 3/32
Input Maximum Speed
1750 rpm
Input Size
7/8 in Dia
Input Type
C-Face Quilled
Keyway Size
3/16 x 3/32 in Input/1/4 x 3 in Output
Length
8.07 in
Lubrication Type
Polyglycol Oil
Material
Cast Iron
Mounting Type
Direct/Floor
No. of Gear Reductions
Single
Output Diameter (in)
1.438
Output Maximum Speed
87.5 rpm
Output Shaft Direction
L or R
Output Size
1-7/16 in ID
Output Torque Range
500 to 1000 in lbs
Output Torque Rating (in-lb)
964 in-lbs @1750 input RPM
Output Type
Hollow
Overhung Load Rating (Output Shaft(lb))
1175
Product Type
Right Angle
Reducer Style
Standard
Series Code
Raider
Service Factor
1
Thrust Rating - output shaft
1144
Torque Rating
56.9 in-lb Input/87.5 in-lb Output
Type
Single Reduction Standard
Width
6 in
Regal Beloit Morse 206Q140H20 107
UPC: 662288346968 | UNSPSC: 25173800 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Morse® Raider® Plus Worm Gear Reducer, Single Reduction Standard, 20:1 Gear Ratio, 1 hp, C-Face Quilled Input, Hollow Output, 7/8 in Dia Input, 1-7/16 in ID Output, 87.5 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 56.9 in-lb Input/87.5 in-lb Output, 2.06 in Centre Distance, 3/16 x 3/32 in Input/1/4 x 3 in Output Keyway, 80 % Efficiency, Polyglycol Oil Lubrication, Direct/Floor Mount, Cast Iron, 8.07 in L x 6 in W x 6.94 in H
Features:
- Rugged cast iron housing provides maximum strength and dependability
- High lead angle worm is case hardened, ground and polished
- Large, single row ball bearings on input shaft to absorb radial and thrust loads at higher input speeds
- Tapered roller bearings are used on output shaft
- Forged bronze worm gears provide optimum balance of strength and wear
- Heavy duty tapered roller bearings on all output shafts
- 143/145TC motor frame size
Certifications/Standards:
FDA Approved
Warranty:
1 Year
| Brand | NSK Bearings |
| Model | UCF213-208D1 |
| Brand | Jason Industrial |
| Model | SPA1582 |
