MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
Morse 300Q140H40 203 XH1238 40:1 Ratio 3" Center Distance 0.875" Input Bore (C Face) 0.875" Input Diameter C-Face Quill Input 2.188" Output Diameter Hollow Bore Output Cast Iron Single-Reduction Worm Reducer 40:1 Ratio, 3" Center Distance, 0.875" Input Bore (C Face), 0.875" Input Diameter, C-Face Quill Input, 2.188" Output Diameter, Hollow Bore Output, Cast Iron Single-Reduction Worm Reducer
MODEL XH1238
Contact supplier for technical support on: 800-626-2120
$2,337.18 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Center Distance Range
1" thru 3.25"
Centre Distance
3 in
Efficiency
80
Frame Size
140TC
Gear Ratio
40:1
Gear Type
Worm
HP
1
HP Range
2HP (< 3)
Input Bore (C Face)
0.875
Input HP @ 1750 RPM
2.25
Input Keyway (C Face)
3/16x3/32
Input Maximum Speed
1750 rpm
Input Size
7/8 in Dia
Input Type
C-Face Quilled
Keyway Size
3/16 x 3/32 in Input/1/2 x 3 in Output
Length
10.79 in
Lubrication Type
Polyglycol Oil
Material
Cast Iron
Mounting Type
Direct/Floor
No. of Gear Reductions
Single
Output Diameter (in)
2.188
Output Maximum Speed
43.7 rpm
Output Shaft Direction
L or R
Output Size
2.188 in Dia
Output Torque Range
1000 to 2500 in lbs
Output Torque Rating (in-lb)
2477 in-lbs @1750 input RPM
Output Type
Hollow
Overhung Load Rating (Output Shaft(lb))
2574
Product Type
Worm Speed Reducer
Reducer Style
Standard
Series Code
Raider
Service Factor
1
Thrust Rating - output shaft
2574
Torque Rating
81.03 in-lb Input/43.7 in-lb Output
Type
Single Reduction Standard
Width
7.5 in
Regal Beloit Morse 300Q140H40 203
UPC: 662288575269 | UNSPSC: 25173800 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Morse® Raider® Plus Worm Gear Reducer, Single Reduction Standard, 40:1 Gear Ratio, 1 hp, C-Face Quilled Input, Hollow Output, 7/8 in Dia Input, 2.188 in Dia Output, 43.7 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 81.03 in-lb Input/43.7 in-lb Output, 3 in Centre Distance, 3/16 x 3/32 in Input/1/2 x 3 in Output Keyway, Polyglycol Oil Lubrication, Direct/Floor Mount, Cast Iron, 10.79 in L x 7.5 in W
Features:
- Rugged cast iron housing provides maximum strength and dependability
- High lead angle worm is case hardened, ground and polished
- Large, single row ball bearings on input shaft to absorb radial and thrust loads at higher input speeds
- Tapered roller bearings are used on output shaft
- Forged bronze worm gears provide optimum balance of strength and wear
- Modular worm gear design provides over 10 million configurations from stock components
- Double sealing capability on input and output shafts
- Dimensionally interchangeable with major industry competitors
- 2-3/16 in bore hollow output
Certifications/Standards:
FDA Approved
Warranty:
1 year
