We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Morse 154Q56L5 XC1091 5:1 Ratio 1.54" Center Distance 0.625" Input Bore (C Face) 0.625" Input Diameter C-Face Quill Input 0.75" Output Diameter Solid Shaft Output Cast Iron Single-Reduction Worm Reducer 5:1 Ratio, 1.54" Center Distance, 0.625" Input Bore (C Face), 0.625" Input Diameter, C-Face Quill Input, 0.75" Output Diameter, Solid Shaft Output, Cast Iron Single-Reduction Worm Reducer
MODEL XC1091
Contact supplier for technical support on: 800-626-2120
$978.54 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Assembly
Q-L
Center Distance Range
1" thru 3.25"
Centre Distance
1.54 in
Efficiency
80 %
Frame Size
56C
Gear Ratio
50:1
Gear Type
Worm
H-Tap size
5/16 - 18
Height
5.38 in
HP
1
HP Range
1 to 1-1/2 (< 2)
Input Bore (C Face)
0.625
Input HP @ 1750 RPM
1.66
Input Keyway (C Face)
3/16 X 3/32
Input Maximum Speed
1750 rpm
Input Size
5/8 in Dia
Input Type
C-Face Quilled
Keyway Size
0.1875 x 1.38 in Input
Length
7.13 in
Lubrication Type
Polyglycol Oil
Material
Cast Iron
Model
154Q
Mounting Type
Direct/Floor
No. of Gear Reductions
Single
Output Diameter (in)
0.75
Output Key
3/16 X 1.25
Output Maximum Speed
35 rpm
Output RPM
350
Output Shaft Assembly Code
L
Output Shaft Direction
Left
Output Size
3/4 in Dia x 2.11 in L
Output Torque Range
250 to 500 in lbs
Output Torque Rating (in-lb)
323 in-lbs @1750 input RPM
Output Type
Left
Overhung Load Rating (Output Shaft(lb))
388
Product Type
Worm Speed Reducer
Ratio Range
5:1
Reducer
Worm - Right Angle
Reducer Style
Standard
Series Code
Raider
Service Factor
1
Shaft Seal Material
Nitrile
TAP Depth
0.5
Thrust Rating - output shaft
806
Torque Rating
16.71 in-lb Input/35 in-lb Output
Type
Single Reduction Standard
Width
6.72 in
Regal Beloit Morse 154Q56L5
UPC: 662288340331 | UNSPSC: 25173800 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Morse® Raider® Plus Worm Gear Reducer, Single Reduction Standard, 50:1 Gear Ratio, 1 hp, C-Face Quilled Input, Left Output, 5/8 in Dia Input, 3/4 in Dia x 2.11 in L Output, 35 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 16.71 in-lb Input/35 in-lb Output, 1.54 in Centre Distance, 0.1875 x 1.38 in Input Keyway, 80 % Efficiency, Polyglycol Oil Lubrication, Direct/Floor Mount, Cast Iron, 7.13 in L x 6.72 in W x 5.38 in H
Features:
- Rugged cast iron housing provides maximum strength and dependability
- High lead angle worm is case hardened, ground and polished
- Large, single row ball bearings on input shaft to absorb radial and thrust loads at higher input speeds
- Tapered roller bearings are used on output shaft
- Forged bronze worm gears provide optimum balance of strength and wear
- Heavy duty tapered roller bearings on all output shafts
- 56C motor frame size
Certifications/Standards:
FDA Approved
Warranty:
1 Year
| Brand | Gates Rubber |
| Model | 12/8V2120 |
| Brand | Koyo Bearing |
| Model | TRC-613 |
| Brand | NTN Bearing |
| Model | W61948CA |
| Brand | Rocky Mountain Twist |
| Model | 95006109 |