MROSupply Has Hundreds Of Brands, Millions Of Products, Including
Image for Illustration purposes only. Actual product may vary
Morse 206Q56L20 XE1095 20:1 Ratio 2.06" Center Distance 0.625" Input Bore (C Face) 0.625" Input Diameter C-Face Quill Input 1" Output Diameter Solid Shaft Output Cast Iron Single-Reduction Worm Reducer 20:1 Ratio, 2.06" Center Distance, 0.625" Input Bore (C Face), 0.625" Input Diameter, C-Face Quill Input, 1" Output Diameter, Solid Shaft Output, Cast Iron Single-Reduction Worm Reducer
MODEL XE1095
Contact supplier for technical support on: 800-626-2120
$955.87 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Typically Ships in: 1 day
Returnable:No
Assembly
Q-L
Center Distance (in)
2.06 2.06
Center Distance Range
1" thru 3.25"
Efficiency
80
Frame Size
56C
Gear Ratio
20:1
Gear Type
Worm
H-Tap size
3/8 - 16
Height
11.7
Housing Material
Cast Iron
HP Range
1 to 1-1/2 (< 2)
Input Bore (C Face)
0.625
Input Diameter (in)
0.625
Input HP @ 1750 RPM
1.33
Input Keyway (C Face)
3/16 X 3/32
Input RPM
1750
Input Speed
1750
Input Style
C-Face Quill
Length
11
Model
206Q
Mounting Type
No Base
No. of Gear Reductions
Single
Output Diameter (in)
1
Output Key
1/4 X 1.75
Output RPM
87.5
Output Shaft Assembly Code
L
Output Shaft Direction
Left
Output Torque Range
500 to 1000 in lbs
Output Torque Rating (in-lb)
964 in-lbs @1750 input RPM
Output Type
Solid Shaft
Overhung Load Rating (Output Shaft(lb))
1078
Product Type
Worm Speed Reducer
Ratio Range
20:1
Reducer
Worm - Right Angle
Reducer Style
Standard
Series Code
Raider
Service Factor
1
Shaft Seal Material
Nitrile
TAP Depth
0.61
Thrust Rating - output shaft
1980
Width
10.4
Regal Beloit Morse 206Q56L20
UPC: 662288913825 | UNSPSC: 25173800 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Morse Raider Plus Worm Gear Reducer, Single Reduction, 20:1 Gear Ratio, 1 hp, C-Face Quilled Input, Left Hand Output, 5/8 in Dia Input, 1 in Dia x 2.29 in L Output, 87.5 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 56.9 in-lb Input/87.5 in-lb Output, 2.06 in Centre Distance, 0.1875 x 1.38 in Input Keyway, Polyglycol Oil Lubrication, Direct/Floor Mount, Stainless Steel, 8.07 in L x 7.07 in W
Features:
- Rugged cast iron housing provides maximum strength and dependability
- High lead angle worm is case hardened, ground and polished
- Large, single row ball bearings on input shaft to absorb radial and thrust loads at higher input speeds
- Tapered roller bearings are used on output shaft
- Forged bronze worm gears provide optimum balance of strength and wear
- Modular worm gear design provides over 10 million configurations from stock components
- Double sealing capability on input and output shafts
- Dimensionally interchangeable with major industry competitors
- 56 NEMA frame
Specs:
| Input Maximum Speed | 1750 rpm |
|---|---|
| Output Maximum Speed | 87.5 rpm |
| Centre Distance | 2.06 in |
| Input Type | C-Face Quilled |
| Output Size | 1 in Dia x 2.29 in L |
| Input Size | 5/8 in Dia |
| Lubrication Type | Polyglycol Oil |
| Torque Rating | 56.9 in-lb Input/87.5 in-lb Output |
| Horsepower | 1 hp |
| Keyway Size | 0.1875 x 1.38 in Input |
| Gear Ratio | 20:1 |
| Output Type | Left Hand |
| Mounting Type | Direct/Floor |
| Dimensions | 8.07 in L x 7.07 in W |
| Material | Stainless Steel |
| Type | Single Reduction |
Packaging:
| Length | 12.25 in |
|---|---|
| Width | 12.25 in |
| Height | 11.25 in |
Certifications/Standards:
FDA Approved
1 year
