We never sell your data to third parties
Morse Raider Plus 262Q56L30 2.62-inch center distance worm gear reducer with C-Face quill input, 30:1 ratio, and left-hand shaft output. This single-reduction unit provides reliable right-angle power transmission for industrial applications. Alternative catalog number XG1127.
MODEL XG1127
Contact supplier for technical support on: 800-626-2120
$1,517.78 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Assembly
Q-L
Center Distance (in)
2.62 2.62
Center Distance Range
1" thru 3.25"
Efficiency
80
Frame Size
56C
Gear Ratio
30:1
Gear Type
Worm
H-Tap size
3/8 - 16
Height
12.9
Housing Material
Cast Iron
HP Range
2HP (< 3)
Input Bore (C Face)
0.625
Input Diameter (in)
0.625
Input HP @ 1750 RPM
1.7
Input Keyway (C Face)
3/16 X 3/32
Input RPM
1750
Input Speed
1750
Input Style
C-Face Quill
Length
16.3
Model
262Q
Mounting Type
No Base
No. of Gear Reductions
Single
Output Diameter (in)
1.125
Output Key
1/4 X 2.00
Output RPM
58.3
Output Shaft Assembly Code
L
Output Shaft Direction
Left
Output Torque Range
1000 to 2500 in lbs
Output Torque Rating (in-lb)
1833 in-lbs @1750 input RPM
Output Type
Solid Shaft
Overhung Load Rating (Output Shaft(lb))
1295
Product Type
Worm Speed Reducer
Ratio Range
30:1
Reducer
Worm - Right Angle
Reducer Style
Standard
Series Code
Raider
Service Factor
1
Shaft Seal Material
Nitrile
TAP Depth
0.58
Thrust Rating - output shaft
2956
Width
12.9
Regal Beloit Morse 262Q56L30
UPC: 662288353256 | UNSPSC: 25173800 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Morse® Raider® Plus Worm Gear Reducer, Single Reduction Standard, 30:1 Gear Ratio, 1 hp, C-Face Quilled Input, Left Output, 0.63 in Dia Input, 1.13 in Dia x 2.73 in L Output, 58.3 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 77.25 in-lb Input/58.3 in-lb Output, 2.62 in Centre Distance, 0.1875 x 1.63 in Input Keyway, 80 % Efficiency, Polyglycol Oil Lubrication, Direct/Floor Mount, Cast Iron, 9.53 in L x 8.74 in W x 8 in H
Features:
- Rugged cast iron housing provides maximum strength and dependability
- High lead angle worm is case hardened, ground and polished
- Large, single row ball bearings on input shaft to absorb radial and thrust loads at higher input speeds
- Tapered roller bearings are used on output shaft
- Forged bronze worm gears provide optimum balance of strength and wear
- Heavy duty tapered roller bearings on all output shafts
- 56C motor frame size
Specs:
- Input Maximum Speed: 1750 rpm
- Output Maximum Speed: 58.3 rpm
- Centre Distance: 2.62 in
- Input Type: C-Face Quilled
- Output Size: 1.13 in Dia x 2.73 in L
- Input Size: 0.63 in Dia
- Lubrication Type: Polyglycol Oil
- Efficiency: 80 %
- Torque Rating: 77.25 in-lb Input/58.3 in-lb Output
- Horsepower: 1 hp
- Keyway Size: 0.1875 x 1.63 in Input
- Gear Ratio: 30:1
- Output Type: Left
- Mounting Type: Direct/Floor
- Dimensions: 9.53 in L x 8.74 in W x 8 in H
- Material: Cast Iron
- Type: Single Reduction Standard
Certifications/Standards:
FDA Approved
Warranty:
1 Year
#42739
Brand
Boston Gear
Model
F726-30-B5-G
#2416731
Brand
Winsmith
Model
E26MDJS41000EK
#2416690
Brand
Winsmith
Model
E26MDBS41000EK
| Brand | Timken |
| Model | 20X28X4-R2LS32-S |
| Brand | Champion |
| Model | CS30-1/2-20 |