We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 17Q15H56SP TIGEAR-2 worm gear speed reducer with 15:1 ratio, quill input, hollow bore output, 56C motor flange, 1.7" center distance. Cast iron housing with stainless epoxy paint. 1.27 HP input rating, 583 in-lb output torque. - Ratio: 15:1
- Center Distance: 1.7"
- Input: 56C Flange
- Output Bore/Shaft Diameter: 1"
- Output: Hollow Bore
- Paint/Coating: Silver
- Housing Material: Cast Iron
- Housing Material: Cast Iron
- Input Horse Power: 1.27
- Output Horse Power: 1.08
MODEL 17Q15H56SP
Contact supplier for technical support on: +1-864-284-5700
$1,138.91 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Base to output center height
1.9900 in, 50.546 mm
Bore dia output
1.0000 in, 25.4 mm
Bore length
5.4100 in, 137.414 mm
Case size
17
Center distance (in)
1.7 in, Center distance (in):1.7500 in, 44.45 mm
Horsepower rating input
1.2700 hp, 0.947 kW
Horsepower rating output
1.0800 hp, 0.805 kW
Housing material
Cast iron
Input
56C flange
Input HP
1.27
Input style
Quill
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 56C frame
Mounting bolt pattern length
4.1900 in, 106.426 mm
Mounting bolt pattern width
2.7500 in, 69.85 mm
Nominal ratio
15
Output
Hollow bore
Output bore/shaft diameter
1 in
Output horse power
1.08
Output shaft center to input motor mounting face distance
4.9000 in, 124.46 mm
Output style
Hollow
Overhung load
1190 lbf, 5293.384 N
Paint type
Stainless epoxy
Paint/coating
Silver
Rated torque output
583 in/lb, 583.0 in/lb
Ratio
15 to 1
Seal type
Single-lip contact
Suitable for washdown
No
Thermal horsepower rating
2.0100 hp, 1.499 kW
- Gear Type: Right-angle worm gear reduction
- Ratio: 15:1 reduction
- Input: Quill input design for compact installation
- Output: Hollow bore for direct shaft mounting
- Motor Mount: 56C NEMA C-face flange
- Center Distance: 1.7" for precise gear positioning
- Housing: Cast iron construction with stainless epoxy finish
- Power Rating: 1.27 HP input capacity
- Output Torque: 583 in-lb maximum
- Applications: Material handling, conveyor drives, mixers, and general industrial applications requiring right-angle power transmission
SKU: 127693
Re-seller discount needed
Quick delivery, but I think you should raise your prices for end users and lower your prices for resellers like myself!
Read moreSKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreSKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read more
#142452
Brand
Dodge
Model
17Q15H56
#151939
Brand
Dodge
Model
17A15H56
#143928
Brand
Dodge
Model
17A15H56WP
#5003902
Brand
Dodge
Model
17A15H56SP
#151516
Brand
Dodge
Model
17Q15H56WP
#142452
Brand
Dodge
Model
17Q15H56
#151939
Brand
Dodge
Model
17A15H56
#151516
Brand
Dodge
Model
17Q15H56WP
#143928
Brand
Dodge
Model
17A15H56WP
#5003901
Brand
Dodge
Model
17A15H56LT
#5003902
Brand
Dodge
Model
17A15H56SP
#5999960
Brand
Winsmith
Model
U1815HE56
| Brand | SMC |
| Model | VM230-N02-33A |
| Brand | Cutler Hammer |
| Model | HMCPE100R3C |
| Brand | Hubbell Wiring |
| Model | CR5252IGGY |
| Brand | Dixon |
| Model | GLBR160-4 |
| Brand | JW Winco |
| Model | 453.2-51-57-3/8-55 |
| Brand | JW Winco |
| Model | 452-15-20-M4-S-55 |
SKU: 127693
Re-seller discount needed
Quick delivery, but I think you should raise your prices for end users and lower your prices for resellers like myself!
Read moreSKU: 115894
Excellent
We recently purchased a 30-year old hydroseeder and have no manuals or parts diagrams for it. The manufacturer is since out of business and there is very limited information on line. The most critical part we needed was a Dodge part. The original part was clearly marked with the Dodge name and part number. MRO was quickly able to identify the replacement part and we had in hand in two days. Perfect fit. Thank you MRO Supply for helping make our machine functional.
Read moreSKU: 126926
Oem parts
I was repairing a piece of equipment and wanted the same bearings that were removed. MRO Supply had the OEM bearings at a reduced cost. Shipped and received in a timely manner.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/