We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Grove Gear SS-HMQ821-20-H1-56-20 S213046120 stainless steel worm gear speed reducer with 20:1 ratio, 2.06" center distance, 0.625" input diameter, and 1.250" output hollow bore diameter. This single-reduction right-angle unit features a 56C quill flange input and universal hollow output. The stainless steel housing provides corrosion resistance for washdown and food processing environments.
MODEL S213046120
Contact supplier for technical support on: 800-626-2120
$2,640.04 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Assembly
SS-HMQ
Center distance (in)
2.06
Center Distance Range
1" thru 3.25"
Certifications
IP69K, USDA Accepted Equipment
Gear Type
Worm
Height (in)
12.00
Housing material
Stainless steel
HP Range
1 to 1-1/2 (< 2)
Input Diameter (in)
0.625
Input HP
1.584
Input RPM
1750
Input Style
C-Face quill
Length (in)
15.00
Motor Frame Size
56C
Mounting Style
Shaft Mt
No. of Gear Reductions
Single
Output Diameter (in)
1.250
Output Hollow Shaft Diameter (in)
1.250
Output HP
1.338
Output RPM
87.5
Output Shaft Assembly Code
H1
Output Style
H1
Output Torque
964
Output Torque Range
500 to 1000 in lbs
Output type
Hollow bore
Product Line
Stainless Steel Worm Gear Reducers
Product Type
Right Angle
Ratio
20 to 1
Ratio Range
20-1
Reducer
Worm - Right Angle
Reducer Style
SS-HMQ
Reducer Type
Single
Series
Stainless Steel Worm Gear Reducers
Series Code
SS
Service Factor
1
Size
56C
Width (in)
11.50
Regal Beloit Grove Gear&Reg; S213046120
UPC: | UNSPSC: 26111537 | GTIN:
Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives
Grove Gear® Washguard® Worm Gear Reducer, Right Angle Single Reduction, Series: SS Series, 20:1 Gear Ratio, 1.584 hp Input, 1.338 hp Output, C-Face Quill Input, Hollow Bore Output, 5/8 in Dia Input, 1-1/4 in Dia Output, 87.5 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 964 in-lb Output, 2.06 in Centre Distance, 3/8 x 3/16 in Output Keyway, PAG Synthetic Oil Lubrication, Shaft Mount, 316 Stainless Steel, 6 in W
Features:
- 316 stainless steel housing and covers to withstand extreme environments
- Factory filled with premium Mobil® Glygoyle® 460 PAG lubricant - USDA class H1 approved
- Vent-free "sealed for life" design with Enviroseal technology
- FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
- O-ring on face of input flange provides a positive seal against moisture intrusion
- 303 stainless steel output shaft or sleeve
- Worms are cut, heat treated, ground and polished to provide efficient, quiet operation
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
- Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
- Mounting dimensions are interchangeable with most industry standard reducers
Specs:
- Input Maximum Speed: 1750 rpm
- Output Maximum Speed: 87.5 rpm
- Centre Distance: 2.06 in
- Input Type: C-Face Quill
- Output Size: 1-1/4 in Dia
- Input Size: 5/8 in Dia
- Lubrication Type: PAG Synthetic Oil
- Torque Rating: 964 in-lb Output
- Horsepower: 1.584 hp Input, 1.338 hp Output
- Keyway Size: 3/8 x 3/16 in Output
- Gear Ratio: 20:1
- Output Type: Hollow Bore
- Mounting Type: Shaft
- Dimensions: 6 in W
- Material: 316 Stainless Steel
- Type: Right Angle Single Reduction
- Series: SS Series
Packaging:
- Weight: 30.0 lb
Certifications/Standards:
IP69K
Warranty:
Limited
SKU: 1318956
Replacement for an obsolete gearbox
We needed this gearbox as a replacement for an obsolete model made by Grove Gear back in the 90's. Needed to call the company to find out the equivalent and they directed me towards MRO. If this one will last as long as its predecessor I'll be retired by the time it will need to be replaced again.
Read more
| Brand | Toshiba |
| Model | 0016XDSB47A-P |
| Brand | GMN Bearings USA |
| Model | SM61911 CTA P4+ UL |
| Brand | Electra/Grove Gear |
| Model | EL8300575.19 |
| Brand | GMN Bearings USA |
| Model | S 36 X 62 X 10 |
| Brand | GMN Bearings USA |
| Model | S61801 ETA P4+ UL |
| Brand | GMN Bearings USA |
| Model | HYSM61909 CTA P4+ DUL |
SKU: 1318956
Replacement for an obsolete gearbox
We needed this gearbox as a replacement for an obsolete model made by Grove Gear back in the 90's. Needed to call the company to find out the equivalent and they directed me towards MRO. If this one will last as long as its predecessor I'll be retired by the time it will need to be replaced again.
Read more