We never sell your data to third parties
Dodge 32A60L56 TIGEAR-2 worm gear speed reducer featuring 60:1 ratio, 3-piece coupled input, left side solid output shaft, 56C flange mount, 3.2" center distance. Cast iron housing with synthetic lubricant. 1.5 HP rated, 2138 in-lb output torque. - Ratio: 60:1
- Center Distance: 3.2"
- Input: 56C Flange
- Output Bore/Shaft Diameter: 1.375"
- Output: Left Side Solid Output Shaft
- Paint/Coating: Green
- Housing Material: Cast Iron
- Housing Material: Cast Iron
- Input Horse Power: 1.5
- Output Horse Power: 0.99
MODEL 32A60L56
Contact supplier for technical support on: +1-864-284-5700
$2,138.99 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Base to output center height
3.5000 in, 88.9 mm
Case size
32
Center distance (in)
3.0000 in, 76.2 mm, Center distance (in):3.2 in
Center to end of shaft distance
6.7500 in, 171.45 mm
Gearbox component type
Gearbox
Horsepower rating input
1.5000 hp, 1.119 kW
Horsepower rating output
0.9900 hp, 0.738 kW
Housing material
Cast iron
Input
56C flange
Input HP
1.5
Input style
3-Piece coupled
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 56C frame
Mounting bolt pattern length
7.5000 in, 190.5 mm
Mounting bolt pattern width
4.0000 in, 101.6 mm
Nominal ratio
60
Output
Left side solid output shaft
Output bore/shaft diameter
1.375 in
Output horse power
0.99
Output shaft center to input motor mounting face distance
9.2300 in, 234.442 mm
Output style
Left
Overhung load
2300 lbf, 10230.91 N
Paint type
Standard
Paint/coating
Green
Rated torque output
2138 in/lb, 2138.0 in/lb
Ratio
60 to 1
Seal type
Single-lip contact
Shaft diameter output
1.3750 in, 34.925 mm
Shaft length output
3.2000 in, 81.28 mm
Suitable for washdown
No
Thermal horsepower rating
2.0100 hp, 1.499 kW
- Ratio: 60:1 reduction
- Input Type: 3-piece coupled for easy motor separation
- Output: Left side solid shaft, 1.3750" diameter (34.925 mm)
- Frame: 56C NEMA flange mount
- Center Distance: 3.2" case size 32
- Power Rating: 1.5 HP input, 2138 in-lb output torque
- Housing: Cast iron with green paint finish
- Lubrication: Factory-filled synthetic lubricant, maintenance-free
- Applications: Belt conveyors, agitators, mixers requiring right-angle power transmission
SKU: 117408
P90 coupler
These where a perfect match saved me time and money by getting them fro you guys
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read more
SKU: 117408
P90 coupler
These where a perfect match saved me time and money by getting them fro you guys
Read moreSKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/