We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 32A40LR56 TIGEAR-2 worm gear speed reducer featuring 40:1 ratio, 3-piece coupled input, double solid output shaft (1.3750"), 56C frame, 3.2" center distance. Cast iron housing, 2.09 HP input, 2324 in-lb output torque. - Ratio: 40:1
- Center Distance: 3.2"
- Input: 56C Flange
- Output Bore/Shaft Diameter: 1.375"
- Output: Double Solid Output Shaft
- Paint/Coating: Green
- Housing Material: Cast Iron
- Housing Material: Cast Iron
- Input Horse Power: 2.09
- Output Horse Power: 1.61
MODEL 32A40LR56
Contact supplier for technical support on: +1-864-284-5700
$2,390.40 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Base to output center height
3.5000 in, 88.9 mm
Case size
32
Center distance (in)
3.0000 in, 76.2 mm, Center distance (in):3.2 in
Center to end of shaft distance
6.7500 in, 171.45 mm
Gearbox component type
Gearbox
Horsepower rating input
2.0900 hp, 1.559 kW
Horsepower rating output
1.6100 hp, 1.201 kW
Housing material
Cast iron
Input
56C flange
Input HP
2.09
Input style
3-Piece coupled
Lubrication type
PAG, standard temperature
Motor compatibility
NEMA motor, 56C frame
Mounting bolt pattern length
7.5000 in, 190.5 mm
Mounting bolt pattern width
4.0000 in, 101.6 mm
Nominal ratio
40
Output
Double solid output shaft
Output bore/shaft diameter
1.375 in
Output horse power
1.61
Output shaft center to input motor mounting face distance
9.2300 in, 234.442 mm
Output style
Left, right
Overhung load
2300 lbf, 10230.91 N
Paint type
Standard
Paint/coating
Green
Rated torque output
2324 in/lb, 2324.0 in/lb
Ratio
40 to 1
Seal type
Single-lip contact
Shaft diameter output
1.3750 in, 34.925 mm
Shaft length output
3.2000 in, 81.28 mm
Suitable for washdown
No
Thermal horsepower rating
2.8700 hp, 2.14 kW
- Gear Type: Worm gear, right-angle configuration
- Ratio: 40:1 reduction
- Input: 3-piece coupled for easy motor separation
- Output: Double solid shaft, 1.3750" (34.925 mm) diameter
- Frame: 56C NEMA motor flange
- Center Distance: 3.2" (size 32)
- Performance: 2.09 HP input, 2324 in-lb output torque
- Housing: Cast iron construction with green paint finish
- Weight: 95 lbs
- Applications: Belt conveyors, mixers, agitators, moderate duty industrial equipment
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read more
| Brand | MRC Bearing |
| Model | 220R |
| Brand | Dixon |
| Model | BH125 |
| Brand | Koyo Bearing |
| Model | CR-16 |
| Brand | Consolidated Bearings |
| Model | 93416 |
| Brand | Dixon |
| Model | C08-02A |
| Brand | TB Woods |
| Model | 5R5VX1000 |
| Brand | NSK Bearings |
| Model | 7206CTRDULP4Y |
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/